Looking for a drop! Help needed
#1
10 Second Club
Thread Starter
iTrader: (4)
Join Date: May 2011
Posts: 449
Likes: 0
Received 0 Likes
on
0 Posts
Looking for a drop! Help needed
Im looking drop my 01 silverado..i want a drop but not too low,what do you all recomend? What drop do u have ? If you can post pics of your trucks it would be great.
#5
Teching In
Join Date: Apr 2012
Location: The woodlands, texas
Posts: 28
Likes: 0
Received 0 Likes
on
0 Posts
This might help you when deciding on parts. *99-07c 2WD Drop Parts and Recommendations*
Just remember if you go 6in or lower in the rear you have to cnotch the frame.
Just remember if you go 6in or lower in the rear you have to cnotch the frame.
#6
On The Tree
iTrader: (5)
I don't know if the OP is reg cab, ex, or crew; 2wd or 4x4, but FWIW my last truck was an '06 Z71 Crew and I dropped it 3/4 and was real happy with it. Rode like stock, minor increase in turning radius, and best of all total cost < $100.
I'm working on putting together a package for the new ride now...
I'm working on putting together a package for the new ride now...
Trending Topics
#8
Teching In
Join Date: Apr 2012
Location: The woodlands, texas
Posts: 28
Likes: 0
Received 0 Likes
on
0 Posts
You can aquire a 2/4 drop will looks slightly lowered but ride great. If you dont wanna go too low then deff stay higher than 4/6. If you do go 2/4 id suggest a 6in flip kit w/ 2in lift shackles. Just incase if you ever plan on going lower you can just put on stock shackles and be at 6in. The front springs are the easiest for a 2in drop.