600 horses

I have a 99 silverado with an 8.5 10 bolt 30 spline axles. I ordered a moser mini spool that was for my rearend and the freaking thing won't fit in my carrier. I have removed everything that I could. Has anyone else had a problem installing one of these?

silverado.408

iTrader: (1)

READ THIS https://www.performancetrucks.net/fo...talled-521037/

dirt track racer 81

iTrader: (45)

^^^^^^^ what he said..
My carrier was an open carrier. Let me know if I can machine it for you. $50 plus shipping back to ya.

600 horses

So here is a new problem. I know that the moser mini didnt fit. So I went to the local HotRod shot and got a replacement spider gear set from Motive Gear. Part number GM10BI-30 and tries to install it into the same carrier. It didnt fit either. Am I missing something here. Is there a different carrier that could have been installed from the factory? I really need help with this in a bad way. I have talked to GM and they ran my vin through their system and told me that my rearend is a GM8.5 10bolt with 30 spline axles.

Truckshop

iTrader: (17)

If it's a nbs 99 then it has a 8.6 diff.

AKlowriderZ71

iTrader: (22)

Post a picture of your truck, and a pic of your differential. Did you count the splines on your axle?

600 horses

This is what I have. I also have disc brakes.

dirt track racer 81

iTrader: (45)

Was that an open carrier or g80?

600 horses

It is an open carrier. I don't know what the differences are from the carriers used with the 8.5 and the ones for the 8.6, but the gears and mini spool I tried like I said were for an 8.5 but were too big. I talked to numerous tech guys and even contacted the GM dealer that I bought the truck from and they all said that I had the 8.5 set-up. It would be one thing if only one of the parts didn't work, but I have 2 products from 2 companies and neither one will fit.

AKlowriderZ71

iTrader: (22)

You don't have an 8.5, that is an 8.6, and I don't believe there is a mini spool that will fit "off the shelf".