bwillbblown

99 silverado shifts from 1 to 3 and will not pull in reverse

RandomHero

iTrader: (24)

well tell us more.....

do you have command 2nd gear using the gear selector? Is the tranny fluid smelling burnt. Are there metal shavings in your tranny pan?

But short answer-probably yes.

Derek @ EDO

iTrader: (73)

If you do not have reverse and only have 1 and 3 with no overdrive it sounds as if you broke the sunshell in the tranny, that is a common failure!
If it is the sunshell which im almost 100% sure it is, Yes your tranny is gone!
i drove mine around for like 5000 miles like that!

454navyss

iTrader: (46)

have you checked your tranny fluid? how many miles are on it? do you drive agressively or tow with it, any possibility the tranny was overworked or overheated?

RandomHero

iTrader: (24)

We're on a performance truck website.....you should already know the answer to that

454navyss

iTrader: (46)

not everybody drives the **** out of their trucks. when i drive my 454SS on the street i never take it over 60-65, at the track i make a run and give it about 30 mins to cool down

bwillbblown

20100 miles! its about time. i use the truck for mild towing and daily driving

truckmann

iTrader: (8)

is that mileage missing a zero???

454navyss

iTrader: (46)

i am thinking he missed a zero

FLT

iTrader: (1)

You definitely have a broken shell. I would recommend when you have it replaced that you go with a Beast sun shell. We do offer the FLT beast which is a modified version with a bearing and a custom machined low roller race.