Need a replacement flex plate/ Flywheel 60E
#1
Need a replacement flex plate/ Flywheel 60E
I cracked my flexplate. I'm looking for a replacement. Anybody got any experience? I have 6.0 with a PI converter and an 80E. I was told the 80E flexplate wont work. The one I have now (that's crakced) is dished not flat.
http://cgi.ebay.com/ebaymotors/LS1-L...Q5fAccessories
Yes?
http://cgi.ebay.com/ebaymotors/ws/eB...d=370173384205
Yes?
http://www.performancetransparts.com...flexplate.aspx
Yes?
http://cgi.ebay.com/ebaymotors/LS1-L...Q5fAccessories
Yes?
http://cgi.ebay.com/ebaymotors/ws/eB...d=370173384205
Yes?
http://www.performancetransparts.com...flexplate.aspx
Yes?
#6
You wouldn’t happen to have the part number handy would you? Ordered a TCI last night. He said it was flat not dished but it's thicker so it will work. The guy at TCI was kind of a douche about it. So if it doesn’t fit, I'll be calling him direct.
"Sir!, we wouldn’t sell an LS1 flex plate that doesn’t fit an LS1" I was like "No **** Sherlock" and proceeded to explain about it being an 80E, 80E converter with an LS1 3 finger bolt pattern and he said the same thing..."Sir!, we wouldn’t sell an LS1 flex plate that doesn’t fit an LS1"
I almost hope it doesn’t fit so I can verbally dick slap him in the forehead.
[/rant]
LOL
Trending Topics
#10
TECH Addict
iTrader: (7)
The TCI 753 is for 60E style converters- 3 bolt, long snout- which you have on your PI. All TCI plates are flat, but they have spacers welded at the bolt holes, so the converter ends up the same position as with the dished OE plate. Might have to clearance the 80E dust cover a little for the heads of the converter bolts though. Had to do that when I used that plate.
Last edited by DrX; 04-29-2010 at 09:06 PM.