No 1st, no OD, not starting in N
#1
Launching!
Thread Starter
iTrader: (6)
Join Date: Oct 2005
Location: Corpus Christi, Texas
Posts: 282
Likes: 0
Received 0 Likes
on
0 Posts
No 1st, no OD, not starting in N
This is kinda wierd the truck won't shift into 1st gear or OD (not even when Wheatley commanded it to).
Also, the truck no longer starts in neutral. I have to put the truck in park.
Where should I start looking. I have some things to check out after work. Check to see if MAF is soiled, check how the truck holds second gear manually, and double-check the linkage.
Any other ideas? Cluster?
Also, the truck no longer starts in neutral. I have to put the truck in park.
Where should I start looking. I have some things to check out after work. Check to see if MAF is soiled, check how the truck holds second gear manually, and double-check the linkage.
Any other ideas? Cluster?
#4
LS1TECH & Trucks Sponsor
iTrader: (24)
Well the prndle switch is the black thing you put on the side when you installed at the linkage shaft. I would address it first, You will likley need to purchase a new one, I would deal with it then clear codes and try again, Since it could of itself cause issue with shifts by telling the PCM the wrong gear position, Then if that didnt take care of it give me a yell and Ill send you a 1-2 shift solenoid (A) Solenoid, One of those two items is really all it can be, Now if the shift issue occurred at the same time as the no start in neutral then the PRNDLE in increased in likleyhood as the cause.
Keep me posted but in either case sounds like a simple electrical failure.
Keep me posted but in either case sounds like a simple electrical failure.