odd 1-2 shifts
#1
On The Tree
Thread Starter
Join Date: Mar 2005
Location: New Orleans
Posts: 131
Likes: 0
Received 0 Likes
on
0 Posts
odd 1-2 shifts
Had a cam and new tune installed and what a difference. I had the tune done with added shift firmness. Since the new tune, the 1-2 shifts kinda suck. If I accelerate slowly, there is a quick "double" bump before shifting to 2nd gear. If I accelerate more than "normal" then I the 1-2 shift is "pretty firm" and there is no "double" bump.
I am requesting a new tune without the shift firmness.
Anyone else with increased shift firmness from a tune have the same issue?
I am requesting a new tune without the shift firmness.
Anyone else with increased shift firmness from a tune have the same issue?
#3
TECH Apprentice
Join Date: May 2005
Location: Temple TX
Posts: 372
Likes: 0
Received 0 Likes
on
0 Posts
i had the HyperJunk3 and it was something similiar. it wasnt anything double, but it shifted like ***. it never could decide between OD and 3rd, constant shift and downshift. but was fine without the HPP3, so i gave Nelson a call... Problem fixed.
#4
TECH Fanatic
iTrader: (2)
Join Date: Mar 2005
Location: Red Stick, La
Posts: 1,966
Likes: 0
Received 0 Likes
on
0 Posts
Jim,
I would say return them to stock, besides, you are getting the shift kit installed soon anyway huh? it'll be plenty firm then, if you want more you can do the two servos...
hardware modification > software modification
I would say return them to stock, besides, you are getting the shift kit installed soon anyway huh? it'll be plenty firm then, if you want more you can do the two servos...
hardware modification > software modification
#5
On The Tree
Thread Starter
Join Date: Mar 2005
Location: New Orleans
Posts: 131
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Nickvrebel
Jim,
I would say return them to stock, besides, you are getting the shift kit installed soon anyway huh? it'll be plenty firm then, if you want more you can do the two servos...
hardware modification > software modification
I would say return them to stock, besides, you are getting the shift kit installed soon anyway huh? it'll be plenty firm then, if you want more you can do the two servos...
hardware modification > software modification
The new tune I requested was back to stock. I have the shift kit sitting here with 2 servos but can't find a tranny guy to install it. They all seem like they are not interested. Can't wait to get it done. You are right, it will be plenty firm. My brother in law had a b&m done in his truck (tranny guy kept his truck for a week) and it shifts plenty firm.
Thread
Thread Starter
Forum
Replies
Last Post