Official A4 to M6 (T-56) Thread!
#271
TECH Resident
iTrader: (15)
Join Date: Dec 2005
Location: Naperville, IL
Posts: 950
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by nightrunner
the t56 will not work on a 4x4 without some custom work, other than is already specified
I need to find some solid info on swapping the NV4500 into a Hummer; I am going to call some of the transmission sh ops and see what I can find out.
Thanks for the info.
#272
Mr. Obvious
iTrader: (4)
Originally Posted by rao
I went back and read the whole thread - I apologize since it was mentioned earlier on.
I need to find some solid info on swapping the NV4500 into a Hummer; I am going to call some of the transmission sh ops and see what I can find out.
Thanks for the info.
I need to find some solid info on swapping the NV4500 into a Hummer; I am going to call some of the transmission sh ops and see what I can find out.
Thanks for the info.
what i meant by that was that it will require a custom transfer case and have a output shaft put on the t56 for it.
and that just a 2wd t56 requires some customization to fit and a 4x4 application would take even more to work, IF it would
#273
TECH Resident
iTrader: (15)
Join Date: Dec 2005
Location: Naperville, IL
Posts: 950
Likes: 0
Received 0 Likes
on
0 Posts
I understand - the T56 is out of the picture. The Hummer has a 408 with the Magnuson supercharger; at that weight and with that power I don't think the T-56 is a good idea, even if it could be made to physically fit.
The 4l65-E keeps dropping output shafts and other miscellaneous parts - 3 transmissions and counting. A swap to a 4L80-E would make more sense but the guy wants to do a manual if possible.
The 4l65-E keeps dropping output shafts and other miscellaneous parts - 3 transmissions and counting. A swap to a 4L80-E would make more sense but the guy wants to do a manual if possible.
#278
On The Tree
iTrader: (5)
im doin the swap this week, thanks to you guys i didnt have the ***** to do it until i realized how straight forward it really is. im using an SSR clutch, flywheel, slave, and M10 SSR tranny. everything is supposed to come in monday, so i hope to get it done by saturday. anybody have a time frame on this? also any tips, tricks, or anything i may need to look out for? thanks
some SSR tranny stats:
http://www.autoblog.com/2006/12/08/a...andr-part-iii/
some SSR tranny stats:
http://www.autoblog.com/2006/12/08/a...andr-part-iii/
#279
TECH Senior Member
iTrader: (6)
Join Date: Jul 2005
Location: Decatur, AL
Posts: 5,257
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by kelleyperformance
im doin the swap this week, thanks to you guys i didnt have the ***** to do it until i realized how straight forward it really is. im using an SSR clutch, flywheel, slave, and M10 SSR tranny. everything is supposed to come in monday, so i hope to get it done by saturday. anybody have a time frame on this? also any tips, tricks, or anything i may need to look out for? thanks
some SSR tranny stats:
http://www.autoblog.com/2006/12/08/a...andr-part-iii/
some SSR tranny stats:
http://www.autoblog.com/2006/12/08/a...andr-part-iii/