Official A4 to M6 (T-56) Thread!
#531
![Default](https://www.performancetrucks.net/forums/images/icons/icon1.gif)
Who has went from a 5 speed to the t56?? Im just a few weekends away from being ready to do this and i need all the info on what im going to do and need...any information on this would be a great help..
#532
![Default](https://www.performancetrucks.net/forums/images/icons/icon1.gif)
I see your from Glen Burnie, are people still going to Ritchy HWY on the weekends? Used to run all the time up there, been a few years.
#533
On The Tree
iTrader: (3)
Join Date: Jul 2007
Location: warrensburg, Mo
Posts: 155
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://www.performancetrucks.net/forums/images/icons/icon1.gif)
I just got my viper t56 bolted up today. Mine was a t56 out of a dodge viper. i work at a machine shop so i turned down the input shaft and make sure you take out the 5 spd pilot bearing and get one for a 02 camaro. When i got it put i noticed that the tranny sits to high when its on the factory 5 spd cross brace so i'm going to take a inch off of it so it will clear the cab and my driveshaft won't rub. you know you have to get a new clutch and everything right. if ya need to know anything let me know. oh instead of trying to repipe the slave cylinder i just i took a slave cylinder from a camaro and drove the roll pin out holding the fitting in and took my truck slave cylinder and drove the roll pin out of it and swapped them out that way. And i had to make a spacer for behind the slave cylinder because i used the viper from cover and used a ls t56 belling housing.
#534
SPAM HUNTER
iTrader: (19)
Join Date: Jan 2004
Location: NM
Posts: 4,099
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://www.performancetrucks.net/forums/images/icons/icon1.gif)
I have just purchased all the small stuff to do the swap. All i have left to buy is the Transmission, and differential kit. I thank everyone who has done the swap and has posted in this thread, Its helped alot.
Dustin
Dustin
#536
SPAM HUNTER
iTrader: (19)
Join Date: Jan 2004
Location: NM
Posts: 4,099
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://www.performancetrucks.net/forums/images/icons/icon1.gif)
TurboGibbs: I bought all that you recommended so i hope it all works
![Rolleyes](https://www.performancetrucks.net/forums/images/smilies/LS1Tech/rolleyes.gif)
![Grin](https://www.performancetrucks.net/forums/images/smilies/LS1Tech/gr_grin.gif)
![Chug! Chug! Chug!](https://www.performancetrucks.net/forums/images/smilies/LS1Tech/gr_chug.gif)
![Nod](https://www.performancetrucks.net/forums/images/smilies/LS1Tech/gr_nod.gif)
Dustin