Official A4 to M6 (T-56) Thread!
#891
you want to buy a kiesler shifter relocation kit. it moves the shifter foward and puts it within an inch of the stock shifter location. I have a picture of the trans, with this done but i do not have an interior shot picture. I also have the drive shaft you need if you want to buy it. I do not have the yoke though.
#892
TECH Enthusiast
iTrader: (8)
Join Date: Apr 2005
Location: springfield MO
Posts: 534
Likes: 0
Received 0 Likes
on
0 Posts
Ed, did you do the relocation yourself or did you take it to a trany shop for them to take it apart. I know it can get a bit tedious inside there and the kit is expencive but I need to do it to mine.
Thanks
Dave
Thanks
Dave
#894
TECH Enthusiast
iTrader: (8)
Join Date: Apr 2005
Location: springfield MO
Posts: 534
Likes: 0
Received 0 Likes
on
0 Posts
thanks for that. I had mine rebuilt but didn't have or was not aware of the kit at the time so I hate to take it back for them to tear apart. It looks pretty complicated so Im not sure I want to tackle it.
Oh thanks for your service. it is appreciated.
Dave
Oh thanks for your service. it is appreciated.
Dave
#896
TECH Enthusiast
iTrader: (8)
Join Date: Apr 2005
Location: springfield MO
Posts: 534
Likes: 0
Received 0 Likes
on
0 Posts
i keep wondering and looking back at them i saved the pics u sent. they are a good looking set. good luck if not i might give them more thought after you get back state side.
#897
On The Tree
iTrader: (2)
Join Date: Jul 2010
Location: N. Michigan
Posts: 130
Likes: 0
Received 0 Likes
on
0 Posts
Great thread!!!! It hasn't been updated in about 8 days so I'll put my project up here..
I've been pouring over this for the last week. My swap will be a bit different, I'm going to have to run a front shift conversion due to the fact I'm going to tackle the 4x4 T56 from RSGear. I have put a call in to them today to verify that he can do the front shift relocation with a GTO instead of an F-body T56. Image below isn't mine but is a decent picture that shows what the rear housing + adapter looks like
Transplant is an 03 SSS, I was thinking about building something similar to this to maintain the sweet console shifter
Thoughts?
I've been pouring over this for the last week. My swap will be a bit different, I'm going to have to run a front shift conversion due to the fact I'm going to tackle the 4x4 T56 from RSGear. I have put a call in to them today to verify that he can do the front shift relocation with a GTO instead of an F-body T56. Image below isn't mine but is a decent picture that shows what the rear housing + adapter looks like
Transplant is an 03 SSS, I was thinking about building something similar to this to maintain the sweet console shifter
Thoughts?
#899
On The Tree
iTrader: (2)
Join Date: Jul 2010
Location: N. Michigan
Posts: 130
Likes: 0
Received 0 Likes
on
0 Posts
Mcleod twin RST or RXT with their flywheel.
Pic is from something random I found, its for representation sake
GTO starter came with trans (only $65!)
I also have a T76 turbo kit for NBS just need to fab the cold side, was going to go 80E but this seems so much cooler
Pic is from something random I found, its for representation sake
GTO starter came with trans (only $65!)
I also have a T76 turbo kit for NBS just need to fab the cold side, was going to go 80E but this seems so much cooler