06sierra5.3

iTrader: (7)

I swapped over the PRNDL switch to my new tranny in the truck. I installed the shift lever, then found the bracket laying in the corner of the garage. does anyone have a picture or can you tell me how this hooks up? i know its just two bolts, but is it before the PRNDL switch? I took this apart almost a year ago, my memory is rusty.

also, the only other thing that escapes my memory is where the vent tube goes. theres a small bracket on it, where does that bolt to?

Bigredmariner

iTrader: (6)

This is the only pic I could find in my stuff,

06sierra5.3

iTrader: (7)

that nails down where it goes, but not how it goes. that helped, thank you.

Bigredmariner

iTrader: (6)

There are two torx head bolts that mount it up to the trans, then there is that U shaped metal clip that has to slide through the plastic of the cable housing to keep it in place. Maybe somebody else has some better pics or explanation. My 06 is at home right now otherwise I would get some better pics for you.

Bigredmariner

iTrader: (6)

I found another one that shows it a little closer, gives you an idea of the clip at least.

06sierra5.3

iTrader: (7)

Im looking for a picture of the body of the bracket mounted to the trans. I used the torx bolts to mount the PRNDL switch. what I am trying to figure out is if the bracket goes on first, or after the PRNDL switch.

thanks for your help so far.

Country Boy

iTrader: (24)

Give me 5 minutes.. lifted trucks are nice

Country Boy

iTrader: (24)

This work?

.. my bad.. 10 minutes

06sierra5.3

iTrader: (7)

perfect, thanks dude.

Country Boy

iTrader: (24)