Power steering went out after donuts.
#1
On The Tree
Thread Starter
Join Date: Nov 2011
Location: San Antonio, TX
Posts: 116
Likes: 0
Received 0 Likes
on
0 Posts
Power steering went out after donuts.
Hey guys I'm not sure if this is the right place for this post but I'm guessing it since its for handling. Well tonight after I pulled off some hard donuts I came to a stop and notice that my steering wheel was stuck when I tried to turn it. So I popped my hood thinking that my band went out but that was still there. A few of the guys in my car club that were rolling with me said I broke one of the little power steering bars that lead to the wheel (I forgot what they said it was called) well there was drops of what appeared to be steering fluid on the floor too and all over my rim. Any one have any ideas of what could have happened?
#4
On The Tree
Thread Starter
Join Date: Nov 2011
Location: San Antonio, TX
Posts: 116
Likes: 0
Received 0 Likes
on
0 Posts
No it's turns cause I drove it home and it's easier to turn once moving but very hard to turn once stoped. And there's a leak by the black little rubber thing that's coiled up I think it's a boot. By the wheel
#7
TECH Veteran
iTrader: (5)
I am thinking a rack seal too. However, to trouble shoot the pump, check the fluid reservoir while the engine is running. You should see the fluid swirling pretty vigorously. If it is the pump, I will advise you to go ahead and replace it with a new GM unit rather than remans from the parts store. I recently when thru 2 remans from O'Reileys, one made it ~300 miles, the other didn't make it out of the driveway.
Trending Topics
#8
On The Tree
Thread Starter
Join Date: Nov 2011
Location: San Antonio, TX
Posts: 116
Likes: 0
Received 0 Likes
on
0 Posts
I just bought a new pump from autozone to replace that. I already checked the fluids and the resovoir is full that's the weird thing. Both wheels are pointing in the same direction and turn perfect with the wheel they're just hard. I lm just not sure if it is my pump or a leak cause there are drop by the boot. Also before my power steering went out there was a loud squeaking noise for a few minutes and then it went away. Anyone?
#9
On The Tree
Thread Starter
Join Date: Nov 2011
Location: San Antonio, TX
Posts: 116
Likes: 0
Received 0 Likes
on
0 Posts
Update: when i pulled out the old pump the little shaft of it was snapped so i was sure it was that but I just put in the new pump which was a total bitch. When I started the truck I heard a large crack followed by 2 other small cracks. And I still doesn't work. Any ideas will be appreciates