Project Semi Back-half
#13
TECH Enthusiast
Thread Starter
iTrader: (9)
Join Date: Apr 2007
Location: New York
Posts: 637
Likes: 0
Received 0 Likes
on
0 Posts
I had captions on each picture but it didn't print??? here's the 411. The 4 link kit,coil over mts and Qa1 coilovers are from Autofab. The front 4'' drop crossmember is from S&W Racecars. The frame extensions( half-moons) I fabbed up as well as the 304 stainless fuel cell. The rear is a narrowed Moser 12 bolt 57" wms to wms 4.11 trutrack 31 spline, Wilwood brakes. I found there is no "kit" for these trucks, the front mounting point for the 4 bars are the biggest problem.
Springs are 250 lb based on 1750 lbs rear weight.
Springs are 250 lb based on 1750 lbs rear weight.
Last edited by Raffman; 02-25-2010 at 04:54 PM. Reason: speling