putting in 4.10's and need advice
#1
putting in 4.10's and need advice
I bought a set of 4.10 gears new and I want to put them in myself I have a dial gauge and I bought a complete install kit. Just wondering if there is a write up on this, I can't seem to find it. Also What are you guys doing for break in on new gears?
#2
PT's Slowest Truck
iTrader: (19)
One of our members, rubrhammer, did a great write up of his gear swap, here's the link
http://jimscampingforums.com/forums/...hp?topic=149.0
http://jimscampingforums.com/forums/...hp?topic=149.0
#5
TECH Addict
iTrader: (3)
Join Date: Dec 2006
Location: Alvin, Texas
Posts: 2,826
Likes: 0
Received 0 Likes
on
0 Posts
break in period has nothing to do with being legal, or am I missing something? I'm just saying to give your new 4.10's a good break-in period. We went by 500 miles, and then checked/refilled the fluid.
Lisa
Trending Topics
#9
PT's Slowest Truck
iTrader: (19)
You want to go through 500 miles at various driving speeds, keeping it under 55 mph I believe. Try to get as many heat up/cool down cycles as possible. Some folks think that the break in isn't necessary, but if you're going to spend the coin on the gears, and take the time that it takes to install them, why take a chance?