Rear disc swap to Drum brakes
#11
MASS seller approved
iTrader: (3)
Join Date: Apr 2011
Location: Mukwonago, Wi
Posts: 324
Likes: 0
Received 0 Likes
on
0 Posts
I don't know of any 5 bolt axles with the same specs beside custom?
If all goes to plan I should have brand new custom 15x10 wheels, good used 28x10.5 Drag slicks, new pads rotors and calipers all for 475. Just need to design a bracket to hold the rear calipers.
Matching front skinny wheels should be less than 200 and tires I still need to look for.
If all goes to plan I should have brand new custom 15x10 wheels, good used 28x10.5 Drag slicks, new pads rotors and calipers all for 475. Just need to design a bracket to hold the rear calipers.
Matching front skinny wheels should be less than 200 and tires I still need to look for.
#13
11 Second Truck Club
Thread Starter
iTrader: (16)
Join Date: Aug 2004
Location: Md
Posts: 3,693
Likes: 0
Received 0 Likes
on
0 Posts
John I allready have 15''x10'' rims I'll have the drum brakes installed fri night rollin on 315/60 e/t streets Sat, And if I want I can have a spare built rear waitin for me.
#19
11 Second Truck Club
Thread Starter
iTrader: (16)
Join Date: Aug 2004
Location: Md
Posts: 3,693
Likes: 0
Received 0 Likes
on
0 Posts
Those tires and the new Hoosier Dot Drag Radial are the only reason im doing this so that I can run in the street class at the drag strip. It should pick up a lil on the big end and Hopefully not give up much on the bottom end. Currently runnin 28'' full slick future 29.5 or 30'' Drag radial.
#20
TECH Junkie
iTrader: (9)
Those tires and the new Hoosier Dot Drag Radial are the only reason im doing this so that I can run in the street class at the drag strip. It should pick up a lil on the big end and Hopefully not give up much on the bottom end. Currently runnin 28'' full slick future 29.5 or 30'' Drag radial.
.