Rear end gear ratio question
#1
Teching In
Thread Starter
Join Date: Feb 2013
Location: arnold,mo
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
Rear end gear ratio question
Okay new to the site awesome info i have question i am getting my rear end re-done on my 03 silverado ext cab 4.8 long tube headers no cats underdrive injen intake and a charlie wheatly tune it has open axel 3.73 i run a 30 inch street tire stock suspension i am looking to get more off the line performance from my gears so i was thinking a 4.56 was the way to go but the rear end guy says you dont want any bigger than 4.11s this is my weekend truck i dont do much highway. mabe once a year for float trips and do haul occasionally and i am not worried bout fuel economy i just want it to pull? any body used 4.56 any suggestions please thanks
#2
TECH Resident
iTrader: (1)
Join Date: Oct 2011
Location: Havelock, New Bern, Newport, NC
Posts: 757
Likes: 0
Received 0 Likes
on
0 Posts
Funny thing, I drive with 30" street tires too and I just ordered 4.56's and a Truetrac. I'll update my thread (About to get traction) next week after the install.
#6
Teching In
Thread Starter
Join Date: Feb 2013
Location: arnold,mo
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
they are not quite stock they are sport tires general grabber uhp v speed rated when i had it tuned i kept turning over reg tires and destroying the right rear one which is another reason i want posi so i can destroy 2 at a time and it will be even
Trending Topics
#10
Teching In
Thread Starter
Join Date: Feb 2013
Location: arnold,mo
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
5.13 wow you must never drive the highway that thing must be a beast well im going 4.56 against the rear end guys suggestions motive high performance gears and eaton posi and Mr. wheatly's new tune and i should be rockin ill let you know how it goes after the gears break in