recommended stall size for a.....
#1
TECH Enthusiast
Thread Starter
Join Date: Oct 2007
Location: HOUSTON, TX
Posts: 627
Likes: 0
Received 0 Likes
on
0 Posts
recommended stall size for a.....
Ext cab LQ4 6.0 Full bolton, 3.73, and is planning on getting a 233/239...598/602...112 and it really depend if he gets it today cause hes not looking for such a loose converter. He really doesnt want bigger than a 3600 and if he needs bigger than that he will pass on the deal.
So what size would be recommended for that cam
So what size would be recommended for that cam
#3
TECH Enthusiast
Thread Starter
Join Date: Oct 2007
Location: HOUSTON, TX
Posts: 627
Likes: 0
Received 0 Likes
on
0 Posts
Ok well i was telling him maybe getting a single disk 4000 and have it made tight so it would ride good for DD. I heard 4000 arent bad in a chevy
Trending Topics
#9
I'd personally get a 3800 rpm 9.5" at least in that setup if it were mine.
Probably getting a 9.5" 3600rpm in mine soon as I can, and its got a smaller cam, 5.3L, and weighs less if that tells you anything.
Probably getting a 9.5" 3600rpm in mine soon as I can, and its got a smaller cam, 5.3L, and weighs less if that tells you anything.
#10
TECH Enthusiast
Thread Starter
Join Date: Oct 2007
Location: HOUSTON, TX
Posts: 627
Likes: 0
Received 0 Likes
on
0 Posts