Hemi Killer

iTrader: (6)

Which combo should I get? Will these fit okay? The only other mods I'm fixing to do to my truck is a Yank 2600 converter and ported 90/90 set-up. I don't know too much about tires and what will fit what. Thanks!

Tires:
28 x 11.5"

28 x 12.5"


Rims:
Size: 16" x 8"
Bolt Circle: 6 x 5-1/2"
Rear Spacing: 4-7/16"

Size: 16" x 8"
Bolt Circle: 6 x 5-1/2"
Rear Spacing: 3-5/8"

Size: 16" x 10"
Bolt Circle: 6 x 5-1/2"
Rear Spacing: 4-7/16"

slowec

iTrader: (9)

You can fit those 28/11.5s on stock 16X7 wheels , they fit a little better on aftermarket 16X8s tho. On a well prepped track those 11.5 should dead hook.

Hemi Killer

iTrader: (6)

okay, I have a stupid question: Which rear spacing do I need on the 16 x 8 rims? 4-7/16" or 3-5/8"?

02BlueStepside

iTrader: (1)

4-7/16 if you want them to be close to being in the fender, although they still may not tuck. 3-5/8 if you want them sticking out of the fender.

Hemi Killer

iTrader: (6)

What's the backspacing on the stock 16x7 rims? So, basically I run a wider tire with the 3 5/8" backspacing?

krambo

iTrader: (4)

Which do you prefer? I tend to go with them tucked for multiple reasons,...just curious on your thoughts.

silver-mod-o

iTrader: (15)

get the 11.5's on stock rims... plenty of people running that combo with excellent 60' results.

ap2002

iTrader: (8)

I have seen the 28x12.50 on stock wheels also and look alot wider than a 11.5,,,, I would definately go with the 28x12.50, so just incase you want to upgrade to a 16x10 wheel later, you'll have a great tire for that also...

edit: by the way is this combo going to be for track only? if it is, dont waste your money and go with some 28x10.0 Hoosier drag slicks... they cost the same with a whole lot better traction...

Blown06

iTrader: (32)

This is what I'm doing until I get this 5-lug thing figured out. I got some stock 16x7's off of ebay last week.

gmtechnician

i have 28x12.5 mickey thompson et streets on 16x10 wheels. wheels have a 4 inch backspacing.