spindle question
#4
TECH Veteran
iTrader: (24)
It won't make a bit of difference how the truck rides. If you're planning on installing them yourself, you'll see what I mean when you get in there. In fact, I'd recommend you not replace the shocks and definitely not the springs unless you want to go lower.
All they do is raise the hub mount on the spindle 2". It doesn't affect the travel of the suspension, it won't compress your shocks any more or less, and you shouldn't even notice a difference in turning radius(unless you got the older model belltechs #2507 or something like that).
All they do is raise the hub mount on the spindle 2". It doesn't affect the travel of the suspension, it won't compress your shocks any more or less, and you shouldn't even notice a difference in turning radius(unless you got the older model belltechs #2507 or something like that).
#6
11 Second Truck Club
iTrader: (48)
, and you shouldn't even notice a difference in turning radius(unless you got the older model belltechs #2507 or something like that).[/QUOTE]
I have no radius problems and I have the 2507's. the 2505's are crap. oh and I have the one's for the 17's. the 16's will have a radius problem, so I hear. the only problem I have is the ball joint stud had to be cut off and I had to grind half the nut off to get the stock 17's to fit. when I go to 20's I will put in some new balljoints. and yes you use all the stock springs and shocks. oh and stock shocks suck. go bilstein or ebelbrock
I have no radius problems and I have the 2507's. the 2505's are crap. oh and I have the one's for the 17's. the 16's will have a radius problem, so I hear. the only problem I have is the ball joint stud had to be cut off and I had to grind half the nut off to get the stock 17's to fit. when I go to 20's I will put in some new balljoints. and yes you use all the stock springs and shocks. oh and stock shocks suck. go bilstein or ebelbrock
Last edited by fastrt; 01-15-2008 at 10:29 PM.
#7
TECH Veteran
iTrader: (24)
I have no radius problems and I have the 2507's. the 2505's are crap. oh and I have the one's for the 17's. the 16's will have a radius problem, so I hear. the only problem I have is the ball joint stud had to be cut off and I had to grind half the nut off to get the stock 17's to fit. when I go to 20's I will put in some new balljoints
Yes, of course! Otherwise no one would be buying them. A 2" drop spindle will drop a truck 2" in the front without doing anything else to the truck
Trending Topics
#8
Launching!
Thread Starter
Join Date: Jan 2008
Location: RGV, Texas
Posts: 207
Likes: 0
Received 0 Likes
on
0 Posts
Yes, of course! Otherwise no one would be buying them. A 2" drop spindle will drop a truck 2" in the front without doing anything else to the truck[/QUOTE]
ok kool thanks guys ima go ahead and place an order out for the belltech spindles
ok kool thanks guys ima go ahead and place an order out for the belltech spindles