Notices
GM Drivetrain & Suspension Chassis | Transmission| Driveshaft | Gears/Rear End/Differential | Traction Aids

strange vibration under heavy accel.

Thread Tools
 
Search this Thread
 
Old 02-15-2010, 09:36 PM
  #1  
Staging Lane
Thread Starter
 
Robertp's Avatar
 
Join Date: Oct 2009
Location: Severna Park MD
Posts: 62
Likes: 0
Received 0 Likes on 0 Posts
Default strange vibration under heavy accel.

ive been getting this weird vibration right at take off under heavy acceleration, i have checked all the U joints, i have flushed the trans fluid, tires have less than 6,000 miles on them, changed both front and rear diff fluids, im running out of ideas? also i get a pronounced pop when going from drive to reverse or vise versa. on this matter the front end parts are all tight. and the trans mount and motor mounts are ok.
Old 02-15-2010, 09:39 PM
  #2  
Staging Lane
Thread Starter
 
Robertp's Avatar
 
Join Date: Oct 2009
Location: Severna Park MD
Posts: 62
Likes: 0
Received 0 Likes on 0 Posts
Default

truck only has 68,000 miles on it.
Old 02-15-2010, 09:40 PM
  #3  
TECH Addict
iTrader: (7)
 
SLOXCAB's Avatar
 
Join Date: May 2009
Location: 1503
Posts: 2,680
Likes: 0
Received 0 Likes on 0 Posts
Default

maybe check converter bolts
Old 02-16-2010, 10:15 PM
  #4  
Staging Lane
Thread Starter
 
Robertp's Avatar
 
Join Date: Oct 2009
Location: Severna Park MD
Posts: 62
Likes: 0
Received 0 Likes on 0 Posts
Default

another new addition to this puzzle. had it out on the highway today, at around 52 mph i get a vibration also, the drive shaft is coming out again to check u joints.
Old 02-16-2010, 10:35 PM
  #5  
2nd fastest 5.3 ECSB
iTrader: (14)
 
trever1t's Avatar
 
Join Date: Oct 2005
Location: NorCal
Posts: 26,690
Likes: 0
Received 1 Like on 1 Post
Default

did this start after your lift?
Old 02-16-2010, 11:36 PM
  #6  
Restricted User
iTrader: (6)
 
bohr898's Avatar
 
Join Date: Feb 2008
Location: Florida jax/st aug
Posts: 113
Likes: 0
Received 0 Likes on 0 Posts
Default

my buddy had the same problem.... turned out to be a miss fire caused by a bad coil...check em out
Old 02-17-2010, 12:21 AM
  #7  
TECH Enthusiast
iTrader: (3)
 
THE-HOE's Avatar
 
Join Date: Apr 2006
Location: Pittsburgh
Posts: 532
Likes: 0
Received 1 Like on 1 Post
Default

maybe jack up your rear end and put it in drive to make sure your drive shaft itself isnt bent... it happened to me i have no clue how. so its worth a try.
Old 02-17-2010, 11:48 AM
  #8  
TECH Apprentice
iTrader: (4)
 
CODE4LS1's Avatar
 
Join Date: May 2002
Location: Redlands, CA
Posts: 380
Likes: 0
Received 0 Likes on 0 Posts
Default

Check for a cracked flex-plate.
Old 02-17-2010, 04:50 PM
  #9  
Staging Lane
Thread Starter
 
Robertp's Avatar
 
Join Date: Oct 2009
Location: Severna Park MD
Posts: 62
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by trever1t
did this start after your lift?
nope it has been lifted for 64,000 of the 68,000 miles.

Originally Posted by bohr898
my buddy had the same problem.... turned out to be a miss fire caused by a bad coil...check em out
i will check that tomorrow. i did just take the procharger off and put iridium plugs back in. but i have checked to make sure my connections are good.

Originally Posted by THE-HOE
maybe jack up your rear end and put it in drive to make sure your drive shaft itself isnt bent... it happened to me i have no clue how. so its worth a try.
had it in the air today. i have a lift at my shop. makes things easy. i rebalanced the tires, they were all out. also the rears look like there oblong. so discount tire direct my be getting a call here soon to find out what there gonna do about these tires with less than 6,000 miles on them that are out of round.


Originally Posted by CODE4LS1
Check for a cracked flex-plate.
will do. i think i remember reading somewhere that this is a common problem.
Old 02-18-2010, 05:43 PM
  #10  
Staging Lane
Thread Starter
 
Robertp's Avatar
 
Join Date: Oct 2009
Location: Severna Park MD
Posts: 62
Likes: 0
Received 0 Likes on 0 Posts
Default

ok so today i checked to see if theres a misfire, none that i can tell with the computer hooked to it.

pulled the cover off of the trans checked the flex plate no cracks found. all bolts tight.

pulled the drive shaft down all u joints feel fine. there is some play in the transfer case up and down very minimal though. trans mount look good.

just for the hell of it i re aligned the front end too. but the vibration is for sure coming from the rear of the truck.


Quick Reply: strange vibration under heavy accel.



All times are GMT -5. The time now is 12:17 AM.