t-56 swap
#21
Launching!
iTrader: (2)
Join Date: Jul 2009
Location: Big Rock, IL
Posts: 208
Likes: 0
Received 0 Likes
on
0 Posts
that looks about right, i just cut the left side off with an angle grinder and installed the RST pedal covers on it which require drilling holes in the pedal itself.
this is the best pic i have...
this is the best pic i have...
#25
TECH Fanatic
iTrader: (38)
You do know there is a very,very long thread on the t56 swap here. I've had mine going on 4 years and love it only thing I broke was the master cylinder mount, pushes the ms out of the firewall. I made a steel sleeve and cut the square patternin it and slid in from the inside. Your gonna love it!!!!
#26
You do know there is a very,very long thread on the t56 swap here. I've had mine going on 4 years and love it only thing I broke was the master cylinder mount, pushes the ms out of the firewall. I made a steel sleeve and cut the square patternin it and slid in from the inside. Your gonna love it!!!!
https://www.performancetrucks.net/fo...thread-381877/
#29
going to pic this up
FS/FT Built T56 Complete/Monster clutch/Tick per/prothane exc.(PICTURES) - LS1TECH
EDIT*
guy decided to sell it local.....
FS/FT Built T56 Complete/Monster clutch/Tick per/prothane exc.(PICTURES) - LS1TECH
EDIT*
guy decided to sell it local.....
Last edited by Boosted_Silverado; 10-10-2011 at 04:33 PM.