Notices
GM Drivetrain & Suspension Chassis | Transmission| Driveshaft | Gears/Rear End/Differential | Traction Aids

Torque Converter Gone Bad Possibly??

Thread Tools
 
Search this Thread
 
Old 10-12-2006, 10:20 PM
  #1  
TECH Senior Member
Thread Starter
iTrader: (45)
 
dirt track racer 81's Avatar
 
Join Date: Jun 2005
Location: Hennessey, Oklahoma
Posts: 9,439
Likes: 0
Received 11 Likes on 5 Posts
Default Torque Converter Gone Bad Possibly??

i was just wondering if any one has had their torque converter go out??
when you go to put my truck in gear all it does is have a quiet whine, really it has the same whine in park just not as loud.. but say its in drive, rev it up a little bit and go to put it in reverse it still just whines ,it doesnt try to grind or anything...could that be a torque converter??
Old 10-12-2006, 11:52 PM
  #2  
Sexy Party Mod
iTrader: (2)
 
FarmerBeau's Avatar
 
Join Date: Mar 2005
Location: Spring, Texas
Posts: 5,429
Likes: 0
Received 0 Likes on 0 Posts
Default

hmmm. My fuddle is taking a **** and it bumps me and makes a low pitch moaning sound when locking up. Hope this helps.
Old 10-13-2006, 08:05 AM
  #3  
TECH Senior Member
Thread Starter
iTrader: (45)
 
dirt track racer 81's Avatar
 
Join Date: Jun 2005
Location: Hennessey, Oklahoma
Posts: 9,439
Likes: 0
Received 11 Likes on 5 Posts
Default

Originally Posted by FarmerBeau
hmmm. My fuddle is taking a **** and it bumps me and makes a low pitch moaning sound when locking up. Hope this helps.
and your **** outa luck on that one..fuddle still not answering phones?
Old 10-13-2006, 08:06 AM
  #4  
12 Second Truck Club
 
Dock Rocker's Avatar
 
Join Date: Nov 2005
Location: Jackson, MS
Posts: 1,451
Likes: 0
Received 0 Likes on 0 Posts
Default

I had one die on me and it did the same thing just went awayno gears at all. Somthing I did not know at the time is that it damaged my thrust baring and that is why I have my motor in the machine show now for a new crank, cam, and lifters. So if it is your verter check your motor before you run it again
Old 10-13-2006, 08:40 AM
  #5  
TECH Senior Member
iTrader: (7)
 
KySilverado's Avatar
 
Join Date: Jun 2004
Location: Central Kentucky
Posts: 5,446
Likes: 0
Received 7 Likes on 7 Posts
Default

That could be a symptom of trans pump failure also.
Old 10-13-2006, 10:05 AM
  #6  
TECH Senior Member
Thread Starter
iTrader: (45)
 
dirt track racer 81's Avatar
 
Join Date: Jun 2005
Location: Hennessey, Oklahoma
Posts: 9,439
Likes: 0
Received 11 Likes on 5 Posts
Default

pulled the trans line out of the radiator and it pumped fluid
Old 10-13-2006, 11:42 AM
  #7  
12 Second Truck Club
 
Dock Rocker's Avatar
 
Join Date: Nov 2005
Location: Jackson, MS
Posts: 1,451
Likes: 0
Received 0 Likes on 0 Posts
Default

Mine was moving fluid. The fans on the converter broke away from the center where the shaft goes in. I had no Idea untill I spoke to the machine shop that when that happens it can take out your crank. Now I know
Old 10-13-2006, 12:45 PM
  #8  
TECH Senior Member
Thread Starter
iTrader: (45)
 
dirt track racer 81's Avatar
 
Join Date: Jun 2005
Location: Hennessey, Oklahoma
Posts: 9,439
Likes: 0
Received 11 Likes on 5 Posts
Default

so is there any way i can tell that this is bad or not?
Old 10-13-2006, 04:36 PM
  #9  
12 Second Truck Club
 
Dock Rocker's Avatar
 
Join Date: Nov 2005
Location: Jackson, MS
Posts: 1,451
Likes: 0
Received 0 Likes on 0 Posts
Default

unfortunatly you will have to pull the trans to see if it is f'ed. I poured the fluid out of the converter and it looked like candy paint with a metal flake.
Old 10-13-2006, 05:29 PM
  #10  
TECH Senior Member
Thread Starter
iTrader: (45)
 
dirt track racer 81's Avatar
 
Join Date: Jun 2005
Location: Hennessey, Oklahoma
Posts: 9,439
Likes: 0
Received 11 Likes on 5 Posts
Default

Originally Posted by Dock Rocker
unfortunatly you will have to pull the trans to see if it is f'ed. I poured the fluid out of the converter and it looked like candy paint with a metal flake.
i pulled the trans yesterday after work..all the fluids looked good..no metal flakes any where..tc is black in one spot though..


Quick Reply: Torque Converter Gone Bad Possibly??



All times are GMT -5. The time now is 03:12 PM.