el_cabby

OK here is it. I finally got some track time on my truck and finally got a feel for my truck. It was a good experience. I am not that concerned about the 60 footer yet. I know I can get that down with practice. What concerns me is that it pulls hard first and second gear, but as soon as get into third gear my truck falls flat on its face, stops pulling bad. I notice the rpms go down to like 4000 rpm's and then i step on the brake and it goes back up to 5000 rpm's. Is my TC going out, can this be corrected with tuning.

el_cabby

no one?

CHEVRACER83

when you touch the brake it should unlock your converter clutch... wonder if thats why the rpms jump back up??

BlackGMC

iTrader: (31)

Are you tuned? I believe the TC locks in 3rd at hight MPH? What MPH are you going into 3rd?

trever1t

iTrader: (14)

Sounds liike your converter is locking too soon but all the 4L60e's are dogs in 3rd...even mine.

FLT

iTrader: (1)

It does sound like your converter is locking and is a tuning issue to me. Start there first. Vince

95ImpSS

iTrader: (2)

I believe stock settings have them locking on the high end of 3rd to the 3-4 transition (I'll have to check my stock files). Some like it that way for dyno numbers, some like it unlocked for 1320' runs to avoid low rpms. Readjusted mine not to lock until 4th and remain unlocked if @ WOT.

el_cabby

thanks for the advise guys, sounds like a retune is due