Transgo 4l60E/4L65E-HD2 shift kit install?
08-21-2007, 09:27 AM
#1
On The Tree
Thread Starter
iTrader: (1)
Join Date: Nov 2006
Posts: 102
Likes: 0
Received 0 Likes
on
0 Posts
Transgo 4l60E/4L65E-HD2 shift kit install?
Should I install everything that comes with the kit or just certain peices? I plan on only using 1 washer or maybe no washers on the accumalater for the shifts. I have read that some guys don't use the entire kit, but I am not sure what is best for a daily driver that pulls a boat once in awhile. Thanks for any advice.
08-21-2007, 10:44 AM
#2
well, for mine the entire kit was not used. i had a tranny shop do the install so i cannot say what was used and what wasn't, but i know i had some parts left over that they gave me back.
and if you have a stock stall, i'd go with 0 washers. i put in 1 washer because i was told higher stalling converters soften shifts, and mine shifts very firm. 1 washer on a stock stall might be too hard for a daily driver.
and if you have a stock stall, i'd go with 0 washers. i put in 1 washer because i was told higher stalling converters soften shifts, and mine shifts very firm. 1 washer on a stock stall might be too hard for a daily driver.
08-21-2007, 11:39 AM
#5
On The Tree
Thread Starter
iTrader: (1)
Join Date: Nov 2006
Posts: 102
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by BlackGMC
Did you buy a corvette servo and 4th gear servo? You might want to throw those in while your in there....
08-21-2007, 11:46 AM
#6
Originally Posted by npb4me
I was told that the servos along with this kit would make it shift really hard. Is this true?
08-21-2007, 11:48 AM
#7
On The Tree
Thread Starter
iTrader: (1)
Join Date: Nov 2006
Posts: 102
Likes: 0
Received 0 Likes
on
0 Posts
I'll search again for the answer. I just don't want my tranny to shift so hard that it is uncomfortable to drive. But I do want it to be stronger because I have a radix coming.
Trending Topics
08-21-2007, 11:50 AM
#8
Originally Posted by npb4me
I'll search again for the answer. I just don't want my tranny to shift so hard that it is uncomfortable to drive. But I do want it to be stronger because I have a radix coming.
Sponser -------------->
08-21-2007, 11:58 AM
#9
