PerformanceTrucks.net Forums

GM Drivetrain & Suspension Chassis | Transmission| Driveshaft | Gears/Rear End/Differential | Traction Aids

TransGo HD2

Thread Tools
 
Search this Thread
 
Old 08-30-2008 | 11:39 PM
  #11  
artypyro's Avatar
artypyro
12 Second Club
iTrader: (4)
 
Joined: Jul 2006
Posts: 77
Likes: 0
From: missouri
Default
i dont think you have to...... but it is probably recomended
Reply Like
Old 08-30-2008 | 11:44 PM
  #12  
ChevyTruck's Avatar
ChevyTruck
Thread Starter
something else
iTrader: (39)
 
Joined: Jun 2008
Posts: 3,726
Likes: 1
From: Newark, DE
Default
what all should i change while im in there? well i know to change the filter....
Reply Like
Old 08-30-2008 | 11:58 PM
  #13  
artypyro's Avatar
artypyro
12 Second Club
iTrader: (4)
 
Joined: Jul 2006
Posts: 77
Likes: 0
From: missouri
Default
is this half or 3/4 ton?
Reply Like
Old 08-31-2008 | 12:03 AM
  #14  
Stoichiometric's Avatar
Stoichiometric
TECH Addict
iTrader: (10)
 
Joined: Nov 2005
Posts: 2,199
Likes: 0
From: Way out there
Default
You can replace the check ***** with torlon if you want to preserve the case for future use. I think this may be more important with an 80e though.
Reply Like
Old 08-31-2008 | 12:12 AM
  #15  
ChevyTruck's Avatar
ChevyTruck
Thread Starter
something else
iTrader: (39)
 
Joined: Jun 2008
Posts: 3,726
Likes: 1
From: Newark, DE
Default
Originally Posted by artypyro
is this half or 3/4 ton?
its a half ton
Reply Like
Old 08-31-2008 | 12:22 AM
  #16  
sbw9056's Avatar
sbw9056
Launching!
iTrader: (9)
 
Joined: Nov 2006
Posts: 297
Likes: 0
From: Texas
Default
Originally Posted by chevytruck
what all should i change while im in there? well i know to change the filter....
You might want to order new metal accumulator pistons, just in case your trans came with the plastic ones. I would also get a hardened separator plate.
Reply Like
Old 08-31-2008 | 12:27 AM
  #17  
ChevyTruck's Avatar
ChevyTruck
Thread Starter
something else
iTrader: (39)
 
Joined: Jun 2008
Posts: 3,726
Likes: 1
From: Newark, DE
Default
Originally Posted by sbw9056
You might want to order new metal accumulator pistons, just in case your trans came with the plastic ones. I would also get a hardened separator plate.
what are thoes part for, well what do thay do?
this whole is a learning wave for me. I want to learn how to do these kind of things.
where can i get them at and a round about price?
Reply Like
Old 08-31-2008 | 12:44 AM
  #18  
sbw9056's Avatar
sbw9056
Launching!
iTrader: (9)
 
Joined: Nov 2006
Posts: 297
Likes: 0
From: Texas
Default
Originally Posted by chevytruck
what are thoes part for, well what do thay do?
this whole is a learning wave for me. I want to learn how to do these kind of things.
where can i get them at and a round about price?
I would post a link where I bought my parts but, they are not a sponsor. Just do a web search for 4l60e parts and you will find them. Give them a call they are very helpful.
Reply Like
Old 08-31-2008 | 01:08 AM
  #19  
ChevyTruck's Avatar
ChevyTruck
Thread Starter
something else
iTrader: (39)
 
Joined: Jun 2008
Posts: 3,726
Likes: 1
From: Newark, DE
Default
are there any special tools that i will need to do this?
Reply Like
Old 08-31-2008 | 01:30 AM
  #20  
ChevyTruck's Avatar
ChevyTruck
Thread Starter
something else
iTrader: (39)
 
Joined: Jun 2008
Posts: 3,726
Likes: 1
From: Newark, DE
Default
also when i went to the auto part store i was asked if i have a dp or a ep, i think that was the other option, tranny. how do i know what one i have?
Reply Like



Advanced Search

All times are GMT -5. The time now is 10:34 PM.