jblack6527

excuse the ignorance, but what exactly is bumpsteer? Hitting the bumpstops and causing the steering wheel to turn? or am I completely off base?

NeverSatisfied02

iTrader: (12)

Bumpsteer has nothing to do with the rear end and everything to do with the front end. Its when your truck pulls left and right when you hit bumps in the road. I LCA drops seem to cause some bumpsteer but the spindles decrease the already shitty turning radius so take your pic at which you would rather sacrifice. lol

OKLAGMCRUISER

A great read on bumpsteer:

http://www.racerpartswholesale.com/longtech3.htm

BigCountryx

iTrader: (3)

Has anyone heard if the 8 lug Mcgaughys Spindles have the same problem with reduced turning radius?

jaegmc99

OK, not to bash but I just found this thread. I have a mcgaughys 2inch spindle with 4inch shackles. Absolute Crap!! Ride quality and handling is great but my truck looked like ****! My front was almost two inches higher than the back! I called them and they replied "all chevys lower differently" uh bullshit. I had the installer raise the back up a notch on the shackle to make it look a little better. front is still a tad higher. I actually bought a 1inch drop spring from eibach. turning radius went to hell as well. I hate mcgaughys

NeverSatisfied02

iTrader: (12)

Thanks for the info man!

Looks like its going to be DJM for me!!!