Two piece driveshaft in rcsb
10-22-2009, 08:01 PM
#1
On The Tree
Thread Starter
iTrader: (1)
Join Date: Mar 2003
Location: Springfield, IL
Posts: 152
Likes: 0
Received 0 Likes
on
0 Posts
Two piece driveshaft in rcsb
Has any body installed a two piece driveshaft in a rcsb? Thinking about trying this because my 4" alum. driveshaft is not working out. Truck is low and rubs on the bottom of the cab. Any input would be great.
10-22-2009, 08:17 PM
#2
12 Second Truck Club
iTrader: (3)
Join Date: Feb 2006
Location: Baton Rouge
Posts: 1,457
Likes: 0
Received 0 Likes
on
0 Posts
Is it just rubbing a lip or something on the cab that could be trimmed... Maybe you could run a smaller diameter steel shaft that would clear. I wouldn't bother with a two piece on such a short shat if it could be avoided.
10-22-2009, 08:59 PM
#4
On The Tree
Thread Starter
iTrader: (1)
Join Date: Mar 2003
Location: Springfield, IL
Posts: 152
Likes: 0
Received 0 Likes
on
0 Posts
Trimmed all I can trim truck is on air. I had the 4" alum. built for high speed but I cant put the pinion where it needs to be because it hits.
