walk me thru a tru trac install
#11
TECH Resident
iTrader: (6)
Join Date: Nov 2009
Location: United State of Texas
Posts: 754
Likes: 0
Received 0 Likes
on
0 Posts
Carrier can just be snugged up, driveshaft needs to be out of the way so you can rotated the pinion when needed. Just take the straps off of the U joint and tie the shaft up out of the way from the crossmember. I usually use a short strap or some rope.
You can look at my thread or AxisT6's thread and there are pics for setting up the dial indicator to measure BL.
Oh yeah, Axles out.
You can look at my thread or AxisT6's thread and there are pics for setting up the dial indicator to measure BL.
Oh yeah, Axles out.
#12
Restricted User
Thread Starter
iTrader: (2)
Join Date: Feb 2009
Posts: 706
Likes: 0
Received 0 Likes
on
0 Posts
Carrier can just be snugged up, driveshaft needs to be out of the way so you can rotated the pinion when needed. Just take the straps off of the U joint and tie the shaft up out of the way from the crossmember. I usually use a short strap or some rope.
You can look at my thread or AxisT6's thread and there are pics for setting up the dial indicator to measure BL.
Oh yeah, Axles out.
You can look at my thread or AxisT6's thread and there are pics for setting up the dial indicator to measure BL.
Oh yeah, Axles out.
Thread
Thread Starter
Forum
Replies
Last Post
echoman
GMT 800 & Older GM General Discussion
2
08-22-2015 01:53 PM
slowlsx
GM Parts Classifieds
2
08-10-2015 05:33 PM