Wanting to lower my 4x4
#1
TECH Enthusiast
Thread Starter
iTrader: (2)
Join Date: Sep 2009
Location: ft worth texas
Posts: 598
Likes: 0
Received 0 Likes
on
0 Posts
Wanting to lower my 4x4
ok i want to lower my 4x4 my big tires and high off the ground are killin my power haha and before i get the response "why didn't u buy a 2wd" well i had no intentions 3 yrs ago to do engine mods sooo... i have keys up front and blocks in the back i still have my stock keys so im assuming put those back in and then what??????? spindles,shackles etc etc i wanna run some stock gm 20's or maybe somethin diff so i dont want to do no 4-6 drop just more like a 2-4 if ya got some pics of your lowered 4x4 post em please
#7
Teching In
I am reviving this thread.
I'm lowering my 05 silverado RCSB 4x4 and am thinking about spindles up front, shackles out back and block delete, maybe hangers and set the shackles to 1" drop. Right noiw I sit 2 3/4" higher in the rear, please keep this in mind ans I want no cali lean but am ok with rake.
If I do not use hangers, will my pinion angle be screwed up?
I just had to tighten my torsion bolts to improve ride quality, will I be able to install lowering keys and tighten them up all the way and get equal (better) ride quality to my cranked stock keys?
I'm lowering my 05 silverado RCSB 4x4 and am thinking about spindles up front, shackles out back and block delete, maybe hangers and set the shackles to 1" drop. Right noiw I sit 2 3/4" higher in the rear, please keep this in mind ans I want no cali lean but am ok with rake.
If I do not use hangers, will my pinion angle be screwed up?
I just had to tighten my torsion bolts to improve ride quality, will I be able to install lowering keys and tighten them up all the way and get equal (better) ride quality to my cranked stock keys?
Trending Topics
#8
I am reviving this thread.
I'm lowering my 05 silverado RCSB 4x4 and am thinking about spindles up front, shackles out back and block delete, maybe hangers and set the shackles to 1" drop. Right noiw I sit 2 3/4" higher in the rear, please keep this in mind ans I want no cali lean but am ok with rake.
If I do not use hangers, will my pinion angle be screwed up?
I just had to tighten my torsion bolts to improve ride quality, will I be able to install lowering keys and tighten them up all the way and get equal (better) ride quality to my cranked stock keys?
I'm lowering my 05 silverado RCSB 4x4 and am thinking about spindles up front, shackles out back and block delete, maybe hangers and set the shackles to 1" drop. Right noiw I sit 2 3/4" higher in the rear, please keep this in mind ans I want no cali lean but am ok with rake.
If I do not use hangers, will my pinion angle be screwed up?
I just had to tighten my torsion bolts to improve ride quality, will I be able to install lowering keys and tighten them up all the way and get equal (better) ride quality to my cranked stock keys?
The shackles and hangers in my opinion are not the way to go. You might as well go with lowering leafs. Much easier. I think the ride would be better as well. I think the keys are not the way to go either. Lower control arms or spindles. I did spindles and if I had to do it again I would go lower control arms.
#9
Teching In
For me, I think I'm just using spindles. After removing the blocks, I am thinking about JUST shackles to maintain rake, maybe remove overload spring. opinions?
Oh, and do I need an alignment after block removal?
Oh, and do I need an alignment after block removal?
#10
No alignment needing for the rear 4*4 block. If you don't have caltracs you need to keep the overload spring. Axle wrap gets bad I have heard. Shackles usually change pinion angle. Pinion angle is a pain in the neck and I hate thinking about it.