Weld Wheels look alike + drag radials pics
#1
Weld Wheels look alike + drag radials pics
I have been wanting a pair of Weld Wheels to mount my M/T drag radials on but they are not offered with our truck bolt pattern. I found these look alikes sold by Pacer with a 6x5.5 bolt circle.. They were 15x8's so I sent them to WeldcraftWheels and had them widened to 10-1/2". The M/T's are 315/60r15.
With the 6-1/2" backspace they will tuck under the rear fenders nicely.
With the 6-1/2" backspace they will tuck under the rear fenders nicely.
Last edited by 67SS509; 11-16-2007 at 07:37 PM.
Trending Topics
#9
11 Second Truck Club
iTrader: (31)
Join Date: Jan 2005
Location: Breaux Bridge, LA
Posts: 5,861
Likes: 0
Received 0 Likes
on
0 Posts
those are very nice!
i've been looking around for a long time and can't find jack.
on that 14bolt of yours, are you running a disc or drum brake setup? just wondering if the brake setup is similar to my 10bolt. i ask this b/c awhile back i wanted to send my stock wheels off to the same place to have them widend 3".
as i looked into it some more, i found out that i would have problems with the rim hitting the calliper. this is with a 16" rim and would be worse with a 15" rim.
between the rim and that bolt on the calliper in this pic, there is 1" clearance.
i've been looking around for a long time and can't find jack.
on that 14bolt of yours, are you running a disc or drum brake setup? just wondering if the brake setup is similar to my 10bolt. i ask this b/c awhile back i wanted to send my stock wheels off to the same place to have them widend 3".
as i looked into it some more, i found out that i would have problems with the rim hitting the calliper. this is with a 16" rim and would be worse with a 15" rim.
between the rim and that bolt on the calliper in this pic, there is 1" clearance.
#10
TECH Senior Member
iTrader: (45)
Join Date: Jun 2005
Location: Hennessey, Oklahoma
Posts: 9,439
Likes: 0
Received 11 Likes
on
5 Posts
those are very nice!
i've been looking around for a long time and can't find jack.
on that 14bolt of yours, are you running a disc or drum brake setup? just wondering if the brake setup is similar to my 10bolt. i ask this b/c awhile back i wanted to send my stock wheels off to the same place to have them widend 3".
as i looked into it some more, i found out that i would have problems with the rim hitting the calliper. this is with a 16" rim and would be worse with a 15" rim.
between the rim and that bolt on the calliper in this pic, there is 1" clearance.
i've been looking around for a long time and can't find jack.
on that 14bolt of yours, are you running a disc or drum brake setup? just wondering if the brake setup is similar to my 10bolt. i ask this b/c awhile back i wanted to send my stock wheels off to the same place to have them widend 3".
as i looked into it some more, i found out that i would have problems with the rim hitting the calliper. this is with a 16" rim and would be worse with a 15" rim.
between the rim and that bolt on the calliper in this pic, there is 1" clearance.