LS1FREEK

iTrader: (1)

I am trying to find a place on the net where I can buy some innertubes for my Mickey Thomson ET Streets (non radials)... The size is 28x12.5x16...

Phantom

iTrader: (16)

why????

chevyboy.520

iTrader: (6)

I have the M/T E/T streets in a 28/11.5/16 and there on stock tahoe wheels. I'm not running tubes. Just have a regular valve stem and they should hold. They might lose some air over a guy days time. But you should t need tubes.

fastrt

iTrader: (48)

I run a set of tractor tubes that fit a 16" wheel, and up to a 29 tall tire. work good for now. the MT tubes are high, and you have to drill your rims for a bigger valve stem. I ran into that a while back. I run a 28/10/16 hoosier slick.

Phantom

iTrader: (16)

seems all m/t's are bad about losing air...solution...buy hoosiers...tubes will leave ya stranded in a heartbeat

MPFD

iTrader: (5)

My Hoosier don't hold air very good either but I don't run tubes...

Phantom

iTrader: (16)

i don't run tubes in my hoosiers, they're 3 years old and they don't leak one bit

00ChevyScott

iTrader: (10)

M/T ET streets on stock 16 allum wheels, they hold air very well. No tubes

MPFD

iTrader: (5)

Thats a pretty good ticket.. I got a 65 in a 30 one time, barely escaped jail cause I pulled over and the 5.0 mustang ran...

LS1FREEK

iTrader: (1)

Oh i just assumed i needed to run tubes! The tires say TUBE TYPE... Well i might as well mount them without tubes and try them!