Why the hell cant I hook up?
#1
Why the hell cant I hook?
I went to the track today and I am pissed. my suspension setup is caltracs with 28'' et streets on stock aluminum wheels. The best 60 ft time I could pull was a 2.07 and my average was 2.37, worst was a 2.9. The best time happened with 16 psi and anything under that I would sway down the track. Before the caltracs I was running clamps and I managed consistent 1.85s. Question is how do I adjust caltracs for track conditions? Right now they are till it hits the spring and 1/4 turn more. Truck has a **** load of torque so I know its not power limited I just can't plant it. Would 16x10 wheels and some 30'' slicks be my solution or what the hell can I try next?
Last edited by tarinitup; 06-30-2007 at 01:23 AM.
#6
TECH Resident
iTrader: (7)
Join Date: Nov 2004
Location: Crane, Tx
Posts: 827
Likes: 0
Received 0 Likes
on
0 Posts
He was at a shitty ****** track called Desert Thunder. I'll compare my runs from there to Penwell. Desert Thunder- best 60' was 2.01, the next week went to Penwell- best 60' was 1.83. Desert never preps the track like it's supposed to be. It's a new track, and they don't know what the **** they are doin. Somethin might be wrong with the adjustment of the Caltracs too, but Desert Thunder is the main reason for the shitty 60's.
Trending Topics
#8
Originally Posted by TurboBerserker
Were you running the same tires and psi with the clamps? Maybe you need to find the psi sweet spot with the caltrac setup?
How wide are those steets?
How wide are those steets?