01Blackerado

iTrader: (4)

4.5sec 0-60 Do you realize that the FERRARI ENZO does it in 4.8secs

vanillagorilla

iTrader: (1)

So lets hear the 1/4mi times since you were at a track! Even a 60ft will help. Careful what you post here, because you know we're going to extrapolate the data. I find it hard to believe that a 2wd is pulling 4.5 0-60's "on radials". What other traction devices do you have? You must be spraying out of the hole and hooking too. I'm sure you G80 loves that.


You can post a dyno print out all day long. I'll post one too that says I have 1300rwhp. Doesn't mean a thing. What I want to see is pics a 3000lb fullsize with a CARBON composite bed!!!

1FUNZ71

My truck did 0-60 in 3.7 flat. I am all stock. I just run the 1/4 in 16.2 because I dont want people to know I have a super fast truck. I am keeping it as a sleeper. So there for I cannot drive it fast. Just to let you know the whole deal about my truck. if I wanted to, it will do 10's all day in the 1/4. 1.2 60ft's on bald street tires. I dont use gas or outside air. I stricktly run Nitrous and I get 42MPG. Oh this is achieved due to my 1/64th thick painted helium filled carbon fiber body that was acid dipped. I am selling the whole kit on ebay. Well I gotta run.

quicksilverado

iTrader: (8)

His web page shows 13.8 @ 102. Which is a far cry from a 4.5 0-60. If you leave the bed off you could come close to 3700 lbs. with no one in the truck.

ITLstallion04

ok, ok.. time to fes up.

Always fun to see what ppl will say when fed a line of bs.

My cardomain page's 1/4 is correct.. however, that 0-60 was for this post bc i figured you all would check that out...

Take a deep breath and calm down while I revel the truth of my beast of a 4.8L... (that was a joke too btw)..

0-60 in 5.6sec Weight= 3600lbs... w/o me in it.. lol i like the comment about the speaker equipment.. so okay, maybe 3675lbs lol anyway... dont take me seriously...




Good day!

SnakeOiler

iTrader: (6)

I'd still like to know why you think it weighs 3600lbs - have you weighed it? What have you done to get it down to that weight? I would think that would be a considerable amount of work.

And what have you done to the engine to put down 394hp? It that just a nitrous shot?

ITLstallion04

Ya know.. i really wish i could find that web page... no i havent weighed it.. im guessing.. bc that site said 3800 for the 01 4.8L rcsb and.. my option is the carbon composite bed... it was an estimation... so im probably wrong about that...


and tht hp rating is bogus as well.. forgot to mention that... i was just ****** w/ you all...

anyone wanna sell me a cam? just curious

hyper

u have to measure 0-60 with the gtech, not a fukin stopwatch. i mean the stopwatch is like the most inaccurate thing.

...and the guy who said his stock 4.8 did a 6flat is an idiot

ITLstallion04

... must i say this again.. i mean seriously..

I WENT TO ATLANTA MOTOR SPEEDWAY... WE (STAFF ON HAND) TIMED IT... USING WHATEVER DEVICE THAT HAD THERE.. it was digital... not some hillbilly holding a stop watch and stopped it when i yelled at him that i was at 60mph.. lol come on

FILE

iTrader: (5)

I agree.. At 6sec on the 0-60 that would put him in the high 14 on the 1/4. It's not going to happen with a stock 4.8.