01 4.8 won't start
#21
TECH Enthusiast
iTrader: (1)
Join Date: Nov 2003
Location: DFW
Posts: 700
Likes: 0
Received 0 Likes
on
0 Posts
Ended up getting a great deal at NAPA they had a complete Delco drop in and it cost me $283.89 out the door.
Unbolted the bed, lifted it, moved it back to set the forward part on the tires, and put cushions on the bumper to set the back part on. Worked great had enough room to get it cleaned up, old one out, and new went with ease. Before we put the bed back on we turned on the key to let it prime up and she fired right up. I went through all the checks all over again to make sure it was good. I used the screwdrive on the passenger fuel rail again and it had positive pressure. All in all very easy to do and it only took me about 2 hours of work, and saved loads of money.
......Many many thanks to DLH2006......You rock.......
Unbolted the bed, lifted it, moved it back to set the forward part on the tires, and put cushions on the bumper to set the back part on. Worked great had enough room to get it cleaned up, old one out, and new went with ease. Before we put the bed back on we turned on the key to let it prime up and she fired right up. I went through all the checks all over again to make sure it was good. I used the screwdrive on the passenger fuel rail again and it had positive pressure. All in all very easy to do and it only took me about 2 hours of work, and saved loads of money.
......Many many thanks to DLH2006......You rock.......
#23
Originally Posted by DLH2006
Never i repeat NEVER buy parts from the stealership, thats why they have NAPA lol
Thread
Thread Starter
Forum
Replies
Last Post
InsaneDomestics
Tuning, Diagnostics, Electronics, and Wiring
5
07-27-2015 02:42 PM
atxlt
Tuning, Diagnostics, Electronics, and Wiring
1
07-20-2015 11:06 PM
Mossyoakglock
GMT 900 Trucks General Discussion
0
07-17-2015 08:30 AM