09/10 5.3 vs 6.0 "TBSS" intake
#1
TECH Fanatic
Thread Starter
iTrader: (25)
Join Date: Nov 2001
Location: SC
Posts: 1,779
Likes: 0
Received 0 Likes
on
0 Posts
09/10 5.3 vs 6.0 "TBSS" intake
Is there any difference between the 2 other than the casting number?
I picked up a TBSS take off intake but the casting number comes up as a 5.3 intake.
And is the intake seal/gasket really $100ish!?!? HOLY COW...showing part number 89060413.
I picked up a TBSS take off intake but the casting number comes up as a 5.3 intake.
And is the intake seal/gasket really $100ish!?!? HOLY COW...showing part number 89060413.
#2
That is the correct PN. You can probably reuse your old one. If you end up with a vac leak, it's simple enough to pull off and replace. BTW, you can get that gasket for $80 from sponsors.
#3
TECH Fanatic
Thread Starter
iTrader: (25)
Join Date: Nov 2001
Location: SC
Posts: 1,779
Likes: 0
Received 0 Likes
on
0 Posts
What about difference between the intakes?!?!?
#7
TECH Fanatic
Thread Starter
iTrader: (25)
Join Date: Nov 2001
Location: SC
Posts: 1,779
Likes: 0
Received 0 Likes
on
0 Posts
Thanks!
What direction does the truck DBW TBs open? My cable one is from counter clockwise when looking at the cable. I was hoping to still run a cable style TB but don't want to mess up the air flow as some have seen with a car TB
What direction does the truck DBW TBs open? My cable one is from counter clockwise when looking at the cable. I was hoping to still run a cable style TB but don't want to mess up the air flow as some have seen with a car TB