3" Duals
#1
3" Duals
I am making alot of changes to the truck right now and exhaust is one of them. I did some porting on a set of 243's i had laying around and milled them .010, also using some .040 cometics. I made the heads look as close as i could to a set of Patriot stg.2 LS6's i took some pics of.
I also have the 228R-112, Fast 90 mildly ported/LS2 TB, Underdrive Pulley, CAI, Pacesetter LT's
My exhaust at the moment consists of just comming off the headers (3" collector) with a 2.5" SBC collector reducer, back into a 2.5" dual in/dual out Magnaflow with built in X and regency tips welded to the muffler. Im thinking of going with 3" duals with x-pipe into the same muffler/tips combo!
Using this x-pipe kit
http://store.summitracing.com/partde...5&autoview=sku
I also have the 228R-112, Fast 90 mildly ported/LS2 TB, Underdrive Pulley, CAI, Pacesetter LT's
My exhaust at the moment consists of just comming off the headers (3" collector) with a 2.5" SBC collector reducer, back into a 2.5" dual in/dual out Magnaflow with built in X and regency tips welded to the muffler. Im thinking of going with 3" duals with x-pipe into the same muffler/tips combo!
Using this x-pipe kit
http://store.summitracing.com/partde...5&autoview=sku
#5
im running the same x-pipe.. i have the headmen tqSteps into dual 3" w/x-pipe to super40 flows.. seems to run pretty good and has good low end response and sounds good to.still have to cut those hangers off.. me and a buddy built the exhaust at my house...