bootleg

Kinda have a goal set for myself now. So far, I've got the following:

LS1 Fans,
PaceSetter LT's w/ ORY & Magnaflow,
Nelson Tuned,
Custom CAI,
Free mods, EGR, TB bypass

I just bought a 2k Vette cam with specs:
2000 LS1 Y-car 12560968 0.5 0.5 207 198 115.5 112/119
And the stock truck cam being:
2000 LR4 12560967 0.466 0.457 190 191 114 112/116

The cam puts me right at $1000.

Think I can make it to 350? Discuss.

GoldenVelvet

Nope. Not on a 4.8. Your going to be about 50 short.

oxidizr

iTrader: (4)

Seems to me you would be looking at 300-310 MAX power.

mzoomora

iTrader: (31)

With the cam, fans, complete exhaust, tune, you still think he will be 50 short? If we are talking RWHP (all that really counts anyway) you are probably right. Motor HP he should be there, dont you think?

bootleg

Think so? I was just wondering. I'm stopping after this cam, I can't afford to be toasting trannies.

BLACKND

iTrader: (5)

To the wheels? Yeah, you'll be short. I've got the mods in my sig and I am sitting at 321 to the wheels. Granted I need so more tuning to be done, think I can get another 10-15 hp outta the cam, but yeah.

GoldenVelvet

GREGO has about the same mods minus the cam and after A LOT of tuning he got 270 to the ground. A cam isnt going to gain the 80HP needed to hit 350; more like (a generous) 30HP

oxidizr

iTrader: (4)

Yeah most 4.8's I've dynoed are in the 240-250 RWHP mark to start with:

LS1 Fans good for 3-5 HP
PaceSetter LT's w/ ORY & Magnaflow good for 15-20 HP
Nelson Tuned good for 10-15 HP
Custom CAI good for 8-12 HP
Free mods, EGR, TB bypass good for 3-5 HP
Cam good for 15-25 HP

About 50-65 RWHP from what i have seen on dynos ... back to my 300-310 RWHP in BEST case senario favoring newer trucks 03+

Richard

TigerFan187

iTrader: (1)

I made 252rwhp with the following mods on my 03 4.8 in the dead of the summer(90 degree temps) on a Dynojet.

K&N FIPK2
Flowmaster 50 series catback
Nelson 93 octane tune
Transgo + vette servo

Everything else was stock-3.42's open diff

litllered 4.8

I had 3.90's, lt's, dumped 40 series, elect fans, hpp3(crap), and cold air intake in '02 4.8 and only got 245rwhp in a 5spd.