4L80e/TransGo Shift Kit/Line Pressure
#14
TECH Fanatic
iTrader: (8)
Join Date: Oct 2003
Location: I like BoomBoom !!
Posts: 1,760
Likes: 0
Received 0 Likes
on
0 Posts
The Superchips tune from Magnuson has the trans line pressure increased already. Be careful you don't increase the line pressure with the washers until you change the tune a little. You should be able to do that with HP Tuners. You don't want to bang the shifts too hard with the Radix!
#15
Originally Posted by wkdivr
The Superchips tune from Magnuson has the trans line pressure increased already. Be careful you don't increase the line pressure with the washers until you change the tune a little. You should be able to do that with HP Tuners. You don't want to bang the shifts too hard with the Radix!
#16
TECH Fanatic
iTrader: (8)
Join Date: Oct 2003
Location: I like BoomBoom !!
Posts: 1,760
Likes: 0
Received 0 Likes
on
0 Posts
I'll be doing the same thing in the next few weeks. Oh yeah......Tony from Under Pressure Motorsports (who I bought the Radix from) told me the other day the program in the flash tuner they sent me was incorrect. They put the correct tune in, and overnighted it to me. Hope to have my truck running tomorrow. (just got back in town tonight) I don't think I did any damage to the pcm with the ground debacle, because the truck started, and ran (although horribly rich) on the stock tune. I only ran it long enough to move it out of the stall, and out to a parking space.
#17
Originally Posted by wkdivr
I'll be doing the same thing in the next few weeks. Oh yeah......Tony from Under Pressure Motorsports (who I bought the Radix from) told me the other day the program in the flash tuner they sent me was incorrect. They put the correct tune in, and overnighted it to me. Hope to have my truck running tomorrow. (just got back in town tonight) I don't think I did any damage to the pcm with the ground debacle, because the truck started, and ran (although horribly rich) on the stock tune. I only ran it long enough to move it out of the stall, and out to a parking space.
#19
Originally Posted by 02denali
hey grip. when we built my 80e i just set all the pressures settings to stock. i did speed up the shift times from .525 to .325 for 4000 rpms and below,. and then .100 for the rest of the settings.
Thread
Thread Starter
Forum
Replies
Last Post
jtphelps289
GM Parts Classifieds
18
09-29-2015 12:00 PM
TAPyvehc93
GM Drivetrain & Suspension
4
09-14-2015 01:22 PM