5.3 aftermarket goodies
#1
5.3 aftermarket goodies
hey guys, I have a 2013 Silverado and I am wanting to install a cam, rockers, pushrods, etc.. I am not very good when it comes to trying to find out info on the different specs for the stuff I need, If you all could please give me some incite as to what length of pushrods, type of rockers etc etc. I would greatly appreciate it... thanks for the info guys
#2
TECH Senior Member
iTrader: (2)
Everything you want is completely dependent on the cam you pick.
Nobody will have any answer untill you pick a camshaft you wish to run.
Do you want to keep VVT or do you want to remove DoD/AFM and VVT altogether??
If so, you'll need the DoD delete kit and all those parts that go along with it.
And stock rockers are more than fine, you'll not need to upgrade those.
Nobody will have any answer untill you pick a camshaft you wish to run.
Do you want to keep VVT or do you want to remove DoD/AFM and VVT altogether??
If so, you'll need the DoD delete kit and all those parts that go along with it.
And stock rockers are more than fine, you'll not need to upgrade those.
#3
sorry the cam I am wanting is a brian tooley stage 3 truck cam here are the specs
218/224 .553/.553 113+3
and no I am not wanting to keep the VVT,DoD, and AFM I did know I would have to buy a DoD delete kit, I have looked into those
218/224 .553/.553 113+3
and no I am not wanting to keep the VVT,DoD, and AFM I did know I would have to buy a DoD delete kit, I have looked into those
Thread
Thread Starter
Forum
Replies
Last Post
Sypher
INTERNAL ENGINE MODIFICATIONS
33
05-16-2016 04:09 PM