6.0 In But Wont Run (Backfires)
#1
TECH Senior Member
Thread Starter
iTrader: (45)
Join Date: Jun 2005
Location: Hennessey, Oklahoma
Posts: 9,439
Likes: 0
Received 11 Likes
on
5 Posts
6.0 In But Wont Run (Backfires)
welp I finally got this bitch in, my fuel rails havent gotten here so i used the truck injectors and fuel rail, yes it will fit in there but wont bolt on..and i dont know if i got the coil packs back onto the right side dont know if this matters or not..well anyways i got it to a point were i can start it and it would crank twice and back fire through the exhaust and intake..me and my friend were jokin about i didnt get the distributor stabbed in right..haha..but anyways any one gotta clue on this??
#3
TECH Fanatic
iTrader: (15)
Join Date: Feb 2005
Location: belleville, il
Posts: 1,087
Likes: 0
Received 0 Likes
on
0 Posts
i'm not sure if yht 2 coil brackets can be interchanged side to side but that could be a possibility as to timing (wireing front to back???)
good start is check all your connections and tell us what changed from your old setup and your new setup and how your computer is tuned, did you doubble check your timing if you changed the cam????
jsut a few things to concider
-erik
good start is check all your connections and tell us what changed from your old setup and your new setup and how your computer is tuned, did you doubble check your timing if you changed the cam????
jsut a few things to concider
-erik
#5
TECH Senior Member
Thread Starter
iTrader: (45)
Join Date: Jun 2005
Location: Hennessey, Oklahoma
Posts: 9,439
Likes: 0
Received 11 Likes
on
5 Posts
i still have the tune from the 5.3 in it..but that shouldnt effect it..i did notice a few more grounds that were not connected as i was putting stuff up tonight..i will hook those up tomorrow and try it again..
#6
Truck addict
Join Date: Apr 2003
Location: Ocean Springs, MS
Posts: 6,559
Likes: 0
Received 0 Likes
on
0 Posts
mine wouldn't start due to a ground in the wrong location. check all grounds and check them again. you have 4 of them i believe. also, don't do the same think i did and run it hard on the 5.3 tune. you will burn a piston. look in the southern section for proof.
Trending Topics
#9
TECH Senior Member
Thread Starter
iTrader: (45)
Join Date: Jun 2005
Location: Hennessey, Oklahoma
Posts: 9,439
Likes: 0
Received 11 Likes
on
5 Posts
Originally Posted by goshawk23
mine wouldn't start due to a ground in the wrong location. check all grounds and check them again. you have 4 of them i believe. also, don't do the same think i did and run it hard on the 5.3 tune. you will burn a piston. look in the southern section for proof.
yea i wont be running it hard on the 5.3 tune..i already have a tune wrote up for the 6.0 that i will start off with