LQ4JOSE

im putting 6.0 in my obs chevy.i would like to know what you guys recommend as far as a good street/track cam more track than street the truck will only be driven occasionally to work (2 miles away from home)and local cruise in. im not concerned about how high of a stall i will need since it wont be a daily driven truck. thanks in advance guys..
keep in mind motor is stock will only run long tube headers and a good tune after the cam is installed

.James.

iTrader: (17)

so you putting in a 6.0, but want to know what kind of cam to run? this what im gathering?

LQ4JOSE

yes sir. i would like some advise and would like to hear about different set ups that have or havent worked for people

brent5631

iTrader: (7)

If you are not worried about the stall you could run well into the 230's duration. But will it help you to go that high with a stock motor I don't know.

silverz28camaro

iTrader: (20)

I run a texas speed tv.2 cam in my 6.0 camaro, lots of mid range to top end power.

232 234 .595 .598 on a 113 is what I have, drives real nice but at the same time pulls hard all the way to 6,600rpms.

If you chose this cam I would also think you would need 4.56 gears and 3,000 stall to make it work properly

low2001gmc

iTrader: (137)

keep in mind that you have a heavy ecsb compared to a rcsb or car....i have a tr224 with a 3400 stall and 3.73s in a rcsb and it is fun to drive around, streetable and quick too. i would say stick to a 224-228 cam for best results....good luck...rob.

LQ4JOSE

thamks man for your advice but its goin in my 89 rcsb truck..

LQ4JOSE

yeah i was goin thruogh the texas speed web site and found a good selection of off the shelve cams.. thats gonna be who i will get it from..

LQ4JOSE

yeah will im really thinklmg about taking my heads to get them ported to help support that big cam. and im getting springs and push rods as well as soon as i figure out wich cam im goin with...



thanks alot guys this really narrows it down some

LQ4JOSE

bump...ttt