GM Engine & Exhaust Performance EFI | GEN I/GEN II/GEN III/GEN IV Engines |Small Block | Big Block |

628hp 680tq 16psi no nitrous

Thread Tools
 
Search this Thread
 
Old 10-03-2004 | 06:14 AM
  #1  
TieRod's Avatar
Thread Starter
TECH Enthusiast
 
Joined: Jan 2004
Posts: 712
Likes: 0
From: KC MO
Default 628hp 680tq 16psi no nitrous VIDEO ADDED

this is parish8, didn't want to log out tierod, i know i can't ever remember my passwords and if i loged him out he might need to know what his is.

went to supertunes in KC today. there were a lot of people there. probably 15-20 people dynoed, those people were working hard and were super nice.

i dont have the sheets in front of me, i will scan them when we get home later. the motor pulled 49x hp, 530tq with 10psi and closed exhaust. then i opened it and pulled something like 550hp and 560tq. the boost jumped to 11psi.

i proceded to add boost a lb or so at a time and ended up at 16psi. pulled 628hp and 680tq. thats with a mix of fuel that figures out to be 105octane. 20deg of timing and less than 1 deg of knock.

playing on the street the maf is maxing as low as 3600rpm and i see 4 wheel peal most of the time as the boost builds. It is a lot of fun on the street, it was roasting the tires from a 50+mph interstate roll

everyone down here in KC is super cool and a lot of fun to hang out with. there will be some kind of monster video in a few days i am sure.

VIDEO >> http://www.neufamily.org/parishdyno.wmv
Old 10-03-2004 | 10:09 AM
  #2  
99Silver6.0's Avatar
TECH Veteran
iTrader: (1)
 
Joined: May 2002
Posts: 4,039
Likes: 1
From: Olathe, Kansas
Default

Originally Posted by TieRod
this is parish8, didn't want to log out tierod, i know i can't ever remember my passwords and if i loged him out he might need to know what his is.

went to supertunes in KC today. there were a lot of people there. probably 15-20 people dynoed, those people were working hard and were super nice.

i dont have the sheets in front of me, i will scan them when we get home later. the motor pulled 49x hp, 530tq with 10psi and closed exhaust. then i opened it and pulled something like 550hp and 560tq. the boost jumped to 11psi.

i proceded to add boost a lb or so at a time and ended up at 16psi. pulled 628hp and 680tq. thats with a mix of fuel that figures out to be 105octane. 20deg of timing and less than 1 deg of knock.

playing on the street the maf is maxing as low as 3600rpm and i see 4 wheel peal most of the time as the boost builds. It is a lot of fun on the street, it was roasting the tires from a 50+mph interstate roll

everyone down here in KC is super cool and a lot of fun to hang out with. there will be some kind of monster video in a few days i am sure.
Your truck is pretty wild man! Crazy to see that thing make over 600rwh! I think Perry needs to lay off the NOS for a while. That was funny when he backfired out on Fairfax and blew his MAF off and had to go looking for it.
Old 10-03-2004 | 10:14 AM
  #3  
XLR8NSS's Avatar
Adkoonerstrator
iTrader: (4)
 
Joined: Nov 2001
Posts: 21,436
Likes: 3
From: Deep in the seedy underworld of Koonerville
Default

That is pretty damn awesome.
Old 10-03-2004 | 10:31 AM
  #4  
moregrip's Avatar
what a rush!
iTrader: (8)
 
Joined: Feb 2004
Posts: 17,611
Likes: 28
From: Las Vegas, NV
Default

great #'s! wowsers!

hey parish, what psi do you typically drive around the street at?

that 50mph four wheel burnout is just crazy!
Old 10-03-2004 | 10:44 AM
  #5  
NOSjohn's Avatar
Restricted User
iTrader: (9)
 
Joined: Apr 2004
Posts: 2,798
Likes: 0
Default

Sweet num-baaaaah's. Now get some C16 and turn that damn boost up to 25 !
Old 10-03-2004 | 01:05 PM
  #6  
hellbents10's Avatar
LS1Tech Sponsor
iTrader: (10)
 
Joined: Mar 2004
Posts: 4,148
Likes: 0
From: Spring Lake, MI
Default

I would have to say "you got er' don good!"
Old 10-03-2004 | 01:07 PM
  #7  
lm7's Avatar
lm7
TECH Fanatic
iTrader: (8)
 
Joined: Dec 2002
Posts: 1,234
Likes: 0
From: San Jose , Yay Area
Default

damnnnnnnnnn that is nuts i wonder what the stock bottom end record is?
Old 10-03-2004 | 01:07 PM
  #8  
greentahoe's Avatar
TECH Addict
iTrader: (2)
 
Joined: Feb 2004
Posts: 2,784
Likes: 0
From: Tampa, Fl
Default

I can only imagine what that 408 will do.
Old 10-03-2004 | 01:38 PM
  #9  
F8L Z71's Avatar
12 Second Truck Club
 
Joined: Feb 2002
Posts: 5,575
Likes: 0
From: Sacramento, CA
Default

If I sell my house I am soo going to buy a 6.0L and some forged pistons!

Thx for the update man. I have some work to do. LOL
Old 10-03-2004 | 01:42 PM
  #10  
NOSjohn's Avatar
Restricted User
iTrader: (9)
 
Joined: Apr 2004
Posts: 2,798
Likes: 0
Default

You're going to sell your house to get a 6.0l w/ forged pistons? Noooooooooooooooo !


Quick Reply: 628hp 680tq 16psi no nitrous



All times are GMT -5. The time now is 05:23 AM.