8.1 injectors ready to install
#1
TECH Resident
Thread Starter
Join Date: Apr 2003
Location: Lone Star, Tx
Posts: 788
Likes: 0
Received 0 Likes
on
0 Posts
8.1 injectors ready to install
alright guys... i got a pair of 8.1 injectors so i can get rid of my whipple aux. injectors. what all is involved with the swap, and what should i set my ls1 file too?
#2
On The Tree
Join Date: Mar 2003
Location: California
Posts: 163
Likes: 0
Received 0 Likes
on
0 Posts
Re: 8.1 injectors ready to install
Set the IFR to 3.77 to start and tune your LTFT's from there. Change your PE table to make sure you don't go lean at WOT. You will also want to tune your injector offset -- Look for the stock values or ask for them on the ls1edit list.
#5
TECH Fanatic
Join Date: Mar 2002
Location: toronto
Posts: 1,452
Likes: 0
Received 0 Likes
on
0 Posts
Re: 8.1 injectors ready to install
I think you need to Clarify which ones you have
i think the automotive versions found in the truck are smaller
the Marine versions are larger i think
where did you get these things from ?
jim
i think the automotive versions found in the truck are smaller
the Marine versions are larger i think
where did you get these things from ?
jim
#6
On The Tree
Join Date: Mar 2003
Location: California
Posts: 163
Likes: 0
Received 0 Likes
on
0 Posts
Re: 8.1 injectors ready to install
IFR in the 8.1 PCM for the stock ~30# 8.1 injectors is 3.77
IFR for the 8.1 marine 43# injectors has been tuned between 4.77 and 5.25. My marine injectors are set to 5.17 but I am sure it will change once I tune the offsets.
IFR for the 8.1 marine 43# injectors has been tuned between 4.77 and 5.25. My marine injectors are set to 5.17 but I am sure it will change once I tune the offsets.
Trending Topics
#9
TECH Resident
Thread Starter
Join Date: Apr 2003
Location: Lone Star, Tx
Posts: 788
Likes: 0
Received 0 Likes
on
0 Posts
Re: 8.1 injectors ready to install
ok... they are the stock truck ones. they flow at 30 pounds. will they work, or did i screw up and purchase the wrong ones?