86 Chevrolet Silverado 350 Edelbrock Carburateur Issues :( ???!!!
#1
TECH Resident
Thread Starter
iTrader: (1)
Join Date: Jul 2004
Location: Kansas
Posts: 896
Likes: 0
Received 0 Likes
on
0 Posts
86 Chevrolet Silverado 350 Edelbrock Carburateur Issues :( ???!!!
ok...I'm pretty sure its the Carburateur...Everytime I get in it I start it...it runs..as long as i keep in the gas as soon as i let off the gas...it kills the motor...even after the motor is warmed up I was wandering if ne one knew the Stock settings for the Carburateur like the 2 front screws...if i twist them all the way in..how far do i back them out..for stock..i can alter it as soon as i can get this ****** to idle...i just can't remember what the stock recomendations were on it..
Thanks Guys!!! ne other idea..would be appreciated.
Thanks Guys!!! ne other idea..would be appreciated.
#4
TECH Resident
Thread Starter
iTrader: (1)
Join Date: Jul 2004
Location: Kansas
Posts: 896
Likes: 0
Received 0 Likes
on
0 Posts
ok..i got the idle Great now..in Park it sounds good..never Dies...
but then when i put it in Reverse It Boggs way down almost to the point of dieing and i push the gas and it stutters then all the sudden..it takes off...revved up high...every gear...it boggs way down til u get goin...WTF???is it doin this for?
but then when i put it in Reverse It Boggs way down almost to the point of dieing and i push the gas and it stutters then all the sudden..it takes off...revved up high...every gear...it boggs way down til u get goin...WTF???is it doin this for?
Trending Topics
#8
TECH Regular
Join Date: Mar 2006
Location: Blaine, TN
Posts: 425
Likes: 0
Received 0 Likes
on
0 Posts
Possibly a float level problem, I have a buddy going through about the same thing. adjusting the idle circuit helped very little. coming off idle is where the problem is. either a stuck metering rod or a stuck or saturated float. He's workin 12hrs a day now so I haven't had time to check more. good luck
#9
TECH Senior Member
Join Date: Jul 2006
Location: Somewhere around -199C
Posts: 7,023
Likes: 0
Received 0 Likes
on
0 Posts
Dude you are running dead rich off idle.... thats why it loads up once you hit the throttle then clears out after a second and goes.... you need to tune the idle to mid throttle transition.... possibly bigger rods?