Anyone have a the Comp Cams Master Lobe spec for LSR lobes?
#3
i am not sure what the thumper cams use
Attached is the DCR spreadsheet i use and the master lobe specs I found on Tech.
The cam i am looking at for my new Forged 5.7 is:
227/227 .614/.614 @ 112+4
+3* of overlap
With my new motor -5cc pistons, stock LS1 bore and 58cc combustion chambers yeilds
CR of 10.85 and DCR of 8.51
Thread
Thread Starter
Forum
Replies
Last Post