Auburn or Eaton?
#1
Auburn or Eaton?
I have an open rear end w/ 3.42s now. I've decided on 4.10s, but I'm not sure which "posi" unit that I want. I've heard good things about both...does anyone have any horror story with either?
I just got a quote on gears, Auburn and installation w/ new bearings and such for $700. Sound about right?
And, just for the record, I might not be selling the truck after all. The Saturn might be on it's last leg.
I just got a quote on gears, Auburn and installation w/ new bearings and such for $700. Sound about right?
And, just for the record, I might not be selling the truck after all. The Saturn might be on it's last leg.
#2
Re: Auburn or Eaton?
I'm going with an eaton. they are rebuildable and seem to be the opinion on what to go with on several boards. The price sounds about right on. My swap is looking like it's going to cost me between $700 and $800 for doing the same thing.
Lar
Lar
#3
Re: Auburn or Eaton?
I had an Auburn limited slip on my S-10. Installed it myself and that was 130,000 miles ago. Never a problem.
If you have never driven with a limited slip before, take it easy the first time you dirve in slippery conditions, there are a few differences in the way traction is lost
If you have never driven with a limited slip before, take it easy the first time you dirve in slippery conditions, there are a few differences in the way traction is lost
#5
TECH Veteran
iTrader: (5)
Re: Auburn or Eaton?
From my research they are both good units but one thing to consider down the road though. The Eaton unit is rebuildable whereas the Auburn is not. However for about the same price of a rebuild kit for an Eaton, you can send you auburn in and they will send you a new one.
#7
13 Second Truck Club
iTrader: (1)
Join Date: Mar 2003
Location: Pueblo de Nuestra Señora la Reina de los Ángeles de la Porciúncula
Posts: 4,094
Likes: 0
Received 1 Like
on
1 Post
Re: Auburn or Eaton?
Tokez: I got my eaton for $350. Installation shouldn't be more than $200 or so.
DON'T go to 4wheelparts unless you want to get bent over.
DON'T go to 4wheelparts unless you want to get bent over.
Trending Topics
#8
TECH Addict
Join Date: Mar 2002
Location: Baton Rouge, LA
Posts: 2,146
Likes: 0
Received 0 Likes
on
0 Posts
Re: Auburn or Eaton?
I'm going with an eaton. they are rebuildable and seem to be the opinion on what to go with on several boards. The price sounds about right on. My swap is looking like it's going to cost me between $700 and $800 for doing the same thing.
Lar
Lar