Back to my turd....
#11
TECH Veteran
iTrader: (6)
Join Date: Nov 2003
Location: Tallahassee, FL
Posts: 4,397
Likes: 0
Received 0 Likes
on
0 Posts
No knock at higher RPMs right?
Your 12.7 was in what DA, or how was the weather?
The cam 'specs' seem good, but was the cam degreed in? I ordered a 219/219-111 + 0 and the actual specs after having it ran on Thunder Racing's cam pro were : 220/219-112+0... Just shows the inaccuracy of things.
I mean, unless you just totally butchered the heads... It's hard to say.
Your 12.7 was in what DA, or how was the weather?
The cam 'specs' seem good, but was the cam degreed in? I ordered a 219/219-111 + 0 and the actual specs after having it ran on Thunder Racing's cam pro were : 220/219-112+0... Just shows the inaccuracy of things.
I mean, unless you just totally butchered the heads... It's hard to say.
#12
TECH Fanatic
Join Date: Dec 2005
Location: arkansas
Posts: 1,932
Likes: 0
Received 0 Likes
on
0 Posts
60' isnt impressive. What size converter? If you could get a 1.65-1.7 60' you would see low 12.5 or lower IMO. That should be a strong cam.
Im going to be running a hair bigger then that with a 2800 converter in a 6.0 soon.
Im going to be running a hair bigger then that with a 2800 converter in a 6.0 soon.
Thread
Thread Starter
Forum
Replies
Last Post
FlowmasterMufflers
8-Lug Truck Performance
1
10-26-2015 06:19 PM
FlowmasterMufflers
8-Lug Truck Performance
0
08-14-2015 01:04 PM
FlowmasterMufflers
GM Engine & Exhaust Performance
0
08-14-2015 12:47 PM
05GMC4.8
GMT 900 Trucks General Discussion
5
08-07-2015 09:55 PM
FlowmasterMufflers
Ford Engine & Exhaust Performance
0
07-22-2015 01:29 PM