cam question
#1
TECH Apprentice
Thread Starter
Join Date: Oct 2011
Location: Cypress, TX
Posts: 332
Likes: 0
Received 0 Likes
on
0 Posts
cam question
i have a 2011 silverado that im planningon supercharging in thenext few months, but at the moment im lookin at a cam, possibly... i want a little bit of lope in it, nothing wild! but it needs to work well with the magnacharger tvs1900. do all cams need the lifters and springs installed or can thecamjust be installed itself ?
#3
TECH Apprentice
Thread Starter
Join Date: Oct 2011
Location: Cypress, TX
Posts: 332
Likes: 0
Received 0 Likes
on
0 Posts
I heard this cam on YouTube and it sounds pretty good it's a 231/235 .617/.620 so I don't need any pushrods or anything just the stiffer springs even with DOD
#4
TECH Fanatic
u need harden p/rs just like spring its a must with a cam swap...dont get the cheap stuff, if u ever wana go bigger u would already have what you need..i would say get 7.4 pushrods and 650 lift spring..what motor you have?
Trending Topics
#8
TECH Apprentice
Thread Starter
Join Date: Oct 2011
Location: Cypress, TX
Posts: 332
Likes: 0
Received 0 Likes
on
0 Posts
What would u suggest for a mild cam that is streetable for a daily? I want it to work with my future plans of supercharging/ water meth here in the next few months...