Catch Can?

Reply Subscribe

Thread Tools

Search this Thread

08-09-2009 | 05:31 PM

#11

JoeyGC5

TECH Addict

iTrader: (24)

Joined: Jun 2003

Posts: 2,674

Likes: 1

From: St Joe, MO

Quote:

Originally Posted by bigboy576103

Ok so i can just simply drill a hole stick a piece of pipe throught the stock ls1 valley cover. I dont have to go out and actually find and spend money on a ls6 valley cover? Right cuz if thats the case that would be freakin awesome... With my intake setup where would be the best place to drill the hole front, back, mid of the valley cover?

Not quite. If you can braze/solder get some copper line or brass pipe and make like a 3"long (1/4 or 1/8" dia) straight peice. Then solder/braze that pipe/peice to a 1/4"npt bushing and tap/thread into the hole drilled into the valley plate (preferably off the motor). Then using the open female threads of the bushing you can pipe/line the valley cover to the catch can.

Reply Like