SS_bnoon_SS

iTrader: (3)

If you have a link for a non-site sponsor, PM me with it. I've found one site that has a Scat "style" crank for $699 and was wondering what anyone else has seen or paid. That's the cheapest non-forged crank I've seen for these engines... sucks compared to the budget $189 knife edged 383 crank I built a couple of years ago... I knew it would be more expensive, but dang!!!

vanillagorilla

iTrader: (1)

What do you mean by Scat "style"? Is it a Scat crank or not? I think Eagle's are cheaper than the Scats. Also are you saying that this is a 4" stroke crank that is cast NOT forged?!?

Lurius

iTrader: (7)

My forged eagle was 745 shipped off ebay. You can get clsoe to same price any day on ebay.

-Lurius

SS_bnoon_SS

iTrader: (3)

It's nodular iron, not forged. Not sure what they mean by Scat "style". Here's the description:

5.7 LS1/ 6.0LT STROKER CRANK
Chev Gen 3 new Scat style stroker nodular iron 4.000" stroke crankshaft Cost $699 #051C

1slow01Z71

iTrader: (36)

No way in hell I would pay that much and not have a forged crank, you can get and Eagle FORGED crank for 100 bucks more.

Hemi Killer

iTrader: (6)

SS_bnoon_SS

iTrader: (3)

I understand totally. With their price being about 50 bucks lower than what I've found a forged one for, I won't be going cast. Thought I could at least find a cast one for around 3 hundred or so (at least half the price of forged), but no dice.

Lurius

iTrader: (7)

yea, I had considered that route too, a non-forged.. Seeing as how I wont be making enough to break one, but theres no low-cost cranks out there for our motors really.

-Lurius

TURBHOE

iTrader: (4)

its probably "cat" there like a rip off scat from what i understand. a freind of mine got a stroker cat crank for his sbc for like$100. lol.