Comp 224/230 in a 5.3
#31
TECH Apprentice
iTrader: (3)
Join Date: Nov 2009
Location: AR
Posts: 322
Likes: 0
Received 0 Likes
on
0 Posts
The only videos I found of that cam on a truck is from username txtootall on youtube but he has an LQ4 and 110lsa on the cam.
Not really an idle clip though..
http://www.youtube.com/watch?v=KfD-d6w0Kis
Not really an idle clip though..
http://www.youtube.com/watch?v=KfD-d6w0Kis
#32
FormerVendor
iTrader: (6)
Join Date: Nov 2004
Location: BERRIEN CENTER,MICHIGAN
Posts: 1,017
Likes: 0
Received 0 Likes
on
0 Posts
Corey, you wouldn't be disappointed at all going with this cam. I have been very very pleased just all around with it. Even as many times as I have wanted to pull the trigger on a different cam just to experiment and trust me I have really wanted to and had a couple good ones picked out I stop myself because I am so content with the way my truck runs now.
#34
TECH Fanatic
iTrader: (8)
Join Date: Apr 2009
Location: Wichita Falls, TX
Posts: 1,166
Likes: 0
Received 0 Likes
on
0 Posts
I run a 224/230 .611/.607 on a 111+2 EPS cam
I love the cam and the truck is a beast on the street!!
Mods are... 1 3/4 LT's, built 65e with TB2500stall, 3.73's an trutrac, volant CAI, tune.
Best runs are 13.9 at 98.... and 9.0 at 80 both are with 2.2 '60s
I'm pretty sure once i put the worked heads and 4k stall in it should go low 13s high 12s
anyways... here's a couple vids
Oh, this is all with a busted valve seal as well
Idle vid
http://www.youtube.com/watch?v=mfo8VQ0D550
1/4 mile vid
http://www.youtube.com/watch?v=qtsc4LNDvz8
I love the cam and the truck is a beast on the street!!
Mods are... 1 3/4 LT's, built 65e with TB2500stall, 3.73's an trutrac, volant CAI, tune.
Best runs are 13.9 at 98.... and 9.0 at 80 both are with 2.2 '60s
I'm pretty sure once i put the worked heads and 4k stall in it should go low 13s high 12s
anyways... here's a couple vids
Oh, this is all with a busted valve seal as well
Idle vid
http://www.youtube.com/watch?v=mfo8VQ0D550
1/4 mile vid
http://www.youtube.com/watch?v=qtsc4LNDvz8
Last edited by f4tal; 04-19-2011 at 12:30 AM.
#35
TECH Regular
#39
TECH Fanatic
iTrader: (8)
Join Date: Apr 2009
Location: Wichita Falls, TX
Posts: 1,166
Likes: 0
Received 0 Likes
on
0 Posts
Street tires keep the rpms up during the shift. Slicks bog into 2nd.
My converter is way too small and not loose enough.